Drainage in the country with their own hands

Existing types of drainage

design suburban drainage are such:

• Deep system.
• Surface system.The most basic function of such a system - this is the diversion of water from the suburban area.To make the device of the system, do not need a lot of effort, as well as the drafting and execution of the plan.It happens:
• chiseled;
• linear;

Tochenyi drainage

Most people faced with the problem of pouring water, which flows from the drain pipes and thus fills the lawns, paths and specially designated areas for planting.In order to be as soon as possible to get rid of this problem, we need to create a special place to be discharged wastewater.

place called Storm-water inlets tap.This well is not large, which has a special division of the partition (siphon).This division is used to blockages, more precisely, not to the emergence of unpleasant odor.

the sake of our security Street inlet must be covered with metal bars, so that no one fell, and the lattice itself can serve as a wonderful decoration on their summer cottage.Importantly do not forget to always check its availability on the receiver.

Linear drainage

People wishing to perform drainage in the country with their own hands, has repeatedly expressed interest to many companies that offer to do everything on the cheap and in a short amount of time, but the result was not worth their expectations.There are many methods for removing water from the area: laying pipes, chutes, troughs.

For durability of the system is necessary, so that the water is pre-cleaned of contaminants such as sand, silt and other organic waste.It applies a special container, which from time to time to do cleaning in order to avoid the flooding occurred.

can also use the option of a ditch, do it from the strong hardware, closed sections, which can only be opened when removing organic substances: sand, silt, gravel and many more different, which depends on your fertilizer and not only.

The use of linear drainage:

• slope of the plot more than 3 degrees to the horizontal.
• When we have the need for drainage of groundwater.
• to exhaust moisture from the tracks.
• When the house is lower than the nearest sites.

Closed drainage system

Quite a number of people who have a holiday site and want to implement drainage in the country with their own hands, want to see him always well-groomed and beautiful.As much as there was no thought, always the most numerous views fall to the use of closed drainage system.To use it, you need to dig a ditch, which is filled with different items, in order that the water could be a good place and in the end it is all covered with soil.

Home drainage - water inlet, which digs a trench that stretches to the collector.The dimensions of the trench should be:

• 0,8-1 m depth.
• 0,4 m width.
• 2-3 cm horizontal slope.
• drains are placed under the collector.
• slope is greater than 4 cm.

With tranches sold soil drainage, the bottom of the geotextile fabric is laid, which tends to leak, as well as its width should have free edges, which will continue to turn around the filter system.

Atop layer throws gravel, expanded clay, gravel with a layer thickness of 5 cm, it is all stacked pipes that should have not a strong bias towards water inlet and only after that can be filled with gravel.Also, be sure to wrap the edges of the geotextile, deepening covered with sand, and on top of all this throws ground.This system will serve you for years to come.

Drainage pipes

most popular and sought-pipe, as well as the highest quality are used for drainage of two types:

• plastic corrugated pipes.
• perforated.

That they were more durable and less polluted, they wrapped geotextile which is used as a filter.This drainage system is not silting and because filtering shortened term prevention.For such washing, we need to be a strong jet of water.