Design of overlap with the device autoparking

Requirements Parking on the roof there are different types and kinds:

• public;
• private;
• mobile;
• stacked.

may already exist and new varieties of modern car parks, but so far only applied in our country above.

Before you start designing the roof structure with the device parking area, is necessary to understand the suitability of a particular roof of a specific building for this purpose.It should be noted that the placement of the parking house at the top - a substantial increase in the load on the entire structure - the walls, floors and foundations.If during the construction of the house is not supposed to use the roof as something else in addition to protection against atmospheric phenomena (eg, construction of the park, swimming pool, parking), parking on the roof of accommodation is strictly prohibited without the additional and substantial measures to strengthen the structure.

In any case, before the roof design and construction of any, even a private home, you need to obtain the necessary permits in the state bodies.

device flat roof

flat roof - it is not just a new trend, but also very cost-effective idea.In this case, it takes much less material, and all the work you can do yourself.Of course, the undisputed advantage of this roof is that this place can accommodate a place for recreation, garden, parking - how it will look - it's up to you.Complex this is nothing, especially if you choose the right material.

also horizontal roofing is easily repaired and maintained.It is possible to place any equipment that will save the territory.Standard list of works to create a horizontal roof as follows:

• on base (metal or concrete) installed insulation, vapor barrier and insulation.After that, applied to the last layer.This is the standard.However, such a roof does not have the necessary strength, and it should be used cautiously.If you are planning an additional burden, this information will be not strong enough, because it is necessary to take into account the margin of weight machines, furniture and equipment possible.
• parking area with cover design device performs additional layer.That is, all standard insulation is laid.The next step - the filter is mounted on the filter layer is necessary to fill the gravel and only then fix the basic element.This can be tiles or other coating is only to solve the owner.One has only to be taken into consideration surface smoothness - for parking on the roof totally unacceptable slippery materials.In the event of tire grip the surface better "safe than nedobdet".
  
• territory to be used for planting, it requires the use of additional materials.Their task is to prevent ingrown roots and leak fluid.
  

It should pay more attention to phase insulation.Better to use a two-layer insulation.The bottom layer in this case, the main, it was he who would be responsible for maintaining most of the heat.Therefore, the thickness of the lower layer can be up to 20 cm. The second layer is responsible for the external load to the surface.It is necessary to use a plastic material dense and high level of adhesion to be securely attached to the base.

Completion

important factor is the calculation of the materials used.Most often the basis of a square meter.In this case, the situation is slightly different.Use "high-grade" material, only whole rolls and sheets.Individual pieces can go on the disposal (if for nothing else will not be useful), or you can leave them for other types of work, again, it's up to you.

Thus, the coating structure with a device parking area, you will be carried out in a dignified manner, using only quality materials.Save on the roof construction will not work anyway!Every penny, not put into operation at remaking the roof can become a significant threat to both the occupants of the house (and the house), and for all that will be on the roof.What materials need to perform all types of work depends on the total area.And most importantly, be aware that this work is best left to professionals.