Build Daily

Equipment And Tools

August 12, 2017 18:07

Machine plaster as the fastest and most economical method for coating

click fraud protection

machinery for plaster

Today, the building materials market offers a wide variety of devices and machines.Each of them have their own characteristics and advantages.For example, a machine for plastering brand Knauf has a very compact size and allows for all kinds of painting works, including primer and paint.

A machine domestic producers Afalina BL-30, on the contrary, is large and, in addition to putty and plaster works, the device also provides a self-leveling floors.In general, all depends on the brand and manufacturer.But, any machine for plaster, designed to perform a number of common functional tasks and must meet certain parameters, which and describe below.

Machine plaster, the main advantages

As has been said, whatever the machine for the application of the plaster, it should provide a number of functional tasks.Also, they all have major advantages.

  • technical reliability, due to the proven method of feeding the mixture, as well as ease of management.With such a device, even a beginner will cope in the construction business.
  • Simplicity and ease of use, thanks to its small size.Device for applying plaster normally has a small height and at the same time to load a large container.
  • robust design, which has a fold-out modules, gripping hand.Without the tool can be easily disassembled and assembled, simply tolerated.
  • Provides mechanization of the most complex processes: preparation, application of the mixture.Also it can be adjusted performance of the machine.This saves your time and effort.
  • Can be used as a small construction crews, and one worker.

plaster for machine and equipment for machine application

Plaster for devices can be produced in dry and liquid form.Suitable for the following reason: concrete and concrete slabs, limestone, ceramic and brick, gypsum and gypsum board, aerated concrete and aerated concrete, all kinds of old coatings.Used strictly composition at temperatures from +5 to + 30 ° C and normal humidity.

Plastering of walls is carried out only on the basis of well-prepared - strong, reliable, clean and dry.To do this, how to prepare it.Purified from dirt and dust, grease and bitumen stains, eliminating the old coating (paint, whitewash).Also check for the presence of surface mold and mildew, which can be removed by using special solutions.

Apply primer, which must match the type of surface.On the outer corners of the angular profile is set, and at the base of the flashing profiles.Mounted on it is all on the surface composition of the special plaster or adhesive mounting.Further, the device is prepared to work according to the instructions, connect the water and power supply.It is the solution for plaster walls.Check that there are no kinks in the hose.

The next step is to stand sideways to the surface on which the solution will be applied.In one hand keep the hose, and the other mortar gun.Open air valve and start filling the first cavities and deep holes, and then fully in all bases. In this direction it is important to make the gun from left to right and top to bottom.That is, always start with the upper left corner of the room.

And if carried out plastering on the ceiling, the process start to the surface on the side opposite the windows. approximate length of each strip should be about 70 centimeters.After the mixture has been applied, the air valve is closed. second layer may be applied only after 30 minutes have passed since the application of the first!

instagram viewer