Build Daily

Equipment And Tools

August 12, 2017 18:08

Motorized vehicles - how not to waste your nerves to purchase and make it your own?

click fraud protection

How to make the truck - a look at the purpose of the work

There are several types of self-propelled trucks: manual, electric and diesel trucks, self-propelled.All of them are widely used in conditions which require agility.Hand Truck does not require specially trained personnel to operate and maintain.

Such devices are different carrying capacity, which can reach up to three hundred kilograms, despite the fact that its own truck weight will be ten times less.The worker only needs to roll the device, maneuvering and keeping balance with a minimum of hand load.

electric and diesel trucks are driven by the engine.They can also be used as draft animals.For example, a self-propelled trolley TS-350, standing six-wheel all-wheel drive-based, has high permeability and snow on the road.

It can be used for plowing, cultivating, harrowing, snow clearing, transportation of sand and soil as a mini-tractor.High maneuverability allows it to turn almost on the spot.Well, this article will tell you how to make your own truck by the example of hand-propelled carts.

truck with their hands - will make frame and chassis

Manual homemade dolly size and shape resembles the usual garden wheelbarrow, but the difference is that this device will have a four-wheel drive, as well as tippers.It starts with the manufacture of the frame.The frame includes two longitudinal members, equipped with handles interconnected by three cross bars.For

longitudinal elements can use metal corners 1500 mm long, for example, the old bed frame.Corners are welded in parallel between three cross bar, at a distance of 280 mm from one another.Longitudinal same elements are not parallel.Between the handles should be a distance of 700 mm, while the front of the frame - 480 mm.Thus, the handle will be placed on the human shoulder width average body.

for fastening axles to the wheels need to use four scarves made of sheet steel with an equilateral triangle with rounded vertices, which are fastened to the frame longitudinal members.Wheels can be put out of molded rubber or pneumatic, which will dampen vibration and facilitate the movement of the sand.Handles can be covered with fabric, rubber or wrap tape.The chassis and frame ready.

Homemade motorized vehicles - making body

trolley also has a body.Necessary for the body to use sheet metal and metal angles, which are welded to the frame and serve as a support and the bottom ends of the body resting on the chassis.To increase the rigidity of the body along the upper edge of the side sheets with a pair of pliers and a hammer bent 10 mm rim.

to the front end wall, or rather to the side of its corners, it is necessary to fix two brackets, which are used for tipping the body.For their production, you can use the plug of the rear wheels of an old bicycle.Stiffness brackets may be enhanced by ties extending from the corners that are welded to the bottom of the body.

After that, you need to install the body on the frame and connect the swing arms with the axis.For easier during unloading tipping body middle rear bracket welded to the bottom plate can be attached to U-shaped metal handle.Motorized vehicles with their hands ready!

instagram viewer