wedge anchor

Features anchor selection for different work

Depending on the conditions under which the fixture will take place by means of anchor devices emit several types of them.Accordingly, the chemical composition of the product is determined, and its shape and design features.

Among the types of anchors are the following:

• Frame metal.It is used, if necessary, fixing of wooden frames and other structures to concrete, brick and stone walls.
• Hexagonal head.Used to secure objects with more weight to the concrete, brick or stone.
• C ring.It can be used to install structures or building tour on concrete or brick surface.
• anchoring hook.It is used in the assembly of various elements in the concrete walls, brick or natural stone.
• Spanner anchor.Suitable for mounting to install frames and designs on stone, concrete and brick walls.
• wedge-anchor.It is used with rapid mounting frames, scaffolding and other structures on the concrete surface, the mounting brackets, suspended ceilings, metal products.
• Anchor wedge.Used for mounting hefty structures on concrete, brick walls and natural stone.
• scores an anchor.It is used in the installation of structures on concrete, brick and stone surfaces.
• anchor ceiling.Suitable for ceiling mounting items such as chains, ropes, cables, suspended ceiling design, lighting.
• scores an anchor-type dowel-nail.Used for mounting profile as well as various articles of thin sheet iron.This type of fixture is non-removable.
• Folding anchor with spring and hook.Used for mounting lightweight structures to the drywall, wood and hollow materials.

Wedge anchor: dimensions, markings and characteristics according to GOST

feature of this type of fastener material is that at the end of the anchor is the tail, which when screwing the product to the wall is the clutch, so that there istower construction within the hole.Therefore, this type of fixing is very reliable and is used in the case where the consolidation are subject to particularly heavy design.

in accordance with GOST dimensions of the wedge anchor can range from 10h100 mm to 8h80.The variety is very large, so you can choose the fastening material for any type of work.Also, a variety of coatings can be used in the creation of anchoring: galvanized, passirovka.

Note!Verify purpose and marking anchors can GOST link http://www.docload.ru/Basesdoc/3/3425/

Each piece is marked in accordance with the type of product, its manufacturer, as well as the size.So anchor the marking may be WAM - 08060. The letters indicate that this Drop anchor wedge, and the numbers that anchor diameter 8 mm, thread - 8 mm, length - 60 mm.

Specificity installation

Mounting wedge anchor has a certain sequence, which will be described below step by step:

Step 1. drilling holes

in the intended place of installation using a drill hole is drilled, the diameter of which must be equated with a similar magnitudefastener.

Step 2. Cleaning the surface

Once the hole is ready, you need to blow it and clean from dust and other by-products of drilling.

Step 3: Install the bolt

Convinced that in a prepared recess are no obstructions of any kind, you need to put into it fixing material.This is done by plugging it in there with a hammer similar to the nail.

Step 4. Fastening anchor in the hole

After the wedge anchor is hammered into the hole, it must be strengthened.This process is carried out by tightening the nuts with a wrench.It is necessary to tighten the nut, then unscrew it.After that should be placed on a bolt mounted material, and then tighten the nut until it stops.

As can be seen from the above steps, there is nothing complicated about the process of installation of the wedge anchor.You need to have a minimum knowledge and skills in the construction business.

Important information about using wedge anchors

when working with a wedge anchor fasteners need to consider some important aspects that can affect the quality of the fastening structure.

• If mount is made to the brick, it is possible to use fasteners with a maximum diameter of 8 mm.Otherwise, it may happen brick split.
• If the job at hand no tools to purge the mounting hole, it is necessary to drill 15-20 mm more.
• Wedge anchor can not be removed.Therefore, when dismantling constructions set planned for the future, it is necessary, as in the previous paragraph, to drill a hole, which is greater than the length of the fastening device.Thus, when removing the attached structure, the article may be left in the drive base.