Wooden snow shovels - for years or for one season ?

wooden shovel for snow removal for those looking for a cheaper

situations are different: broken compact tractors item is hard to find, out of the barn stole tillers, you bought her a broken shovel somewhere abroad, and will enjoy the same and always in the same place.At a certain period, perhaps a couple of months, you will still need a means to clear the tracks of snow cover.In many such cases, confident that the problem will soon be resolved, they prefer cheap plywood shovel for a season.What are the advantages of this solution and what its shortcomings?

In bazaars and small retail outlets with household goods you can find the perfect cheap shovel-lived.Plywood for such tools often used the lowest quality, working edge is lined with plastic recycling, the handle is usually made of birch.If wide wooden shovel for snow removal, which you bought cheaper cost you $ 100, be prepared for the fact that for the whole winter it may not be enough .It happens that the veneer begins to flake after an hour of active work.

Shovel snow wood, it does not make a mistake in her choice?

Qualitative snow shovel made of plywood is not difficult to learn, it does not guard his views, and attracts.Three-layer plywood, used to make such equipment usually has virtually no defects, including swirls.The working part is studded strip of tin, the same metal can also be used to strengthen the tailgate shovels, through which passes the stalk.Proper shovel lacquered plywood protects against premature delamination and the negative effects of moisture in general.

Long life plywood shovels detects metal edge, which does not allow wood abrasions when scraping to cover tracks.Upholstery can be changed as abrasion, which significantly extends the life of equipment.Shovel snow wood in a cheap version is a straight plane plywood sheet nailed to handle it.Qualitative ladle necessarily bent at the rear of the arcuate side, providing smooth sliding of the tool in hard snow.

Shovels snow wood with their hands

Everyone knows that snow-shovel wood consists of a small sheet of plywood rectangular shape and smooth handle, which is often machined from a birch.In addition to these two materials, we need a solid board, preferably boards, better yet, if it is planed.And finally, do not forget the brutal and short self-tapping screws (those that have not passed through the plywood), along with long.

scraper of solid nobody does, because it is quite a heavy tool, although this type of shovel exist - they are intended for the preparation of bread in the Russian oven.

boards that will rear side of the bucket, on the one hand attach an arcuate shape, and the other should stay flat.Plywood fit the length of the arc, and then to one edge of her fasten screws folded around the plate, and the second edge is screwed to the end of the board is bent arc long screws for durability by putting them under another strip of tin.

for fixing the cutting to the bucket are two possibilities.The first is as follows.At the center of all we do at propyl diameter cutting using crowns, a special nozzle for a drill.The axis of the hole should be slightly declined towards the edge of a flat board, by 10 degrees, so that the shank passing through it, made in advance braced obliquely cut end in plywood.On further fastening explain later, after we consider the second variant of the cutting unit.

It is easier, in the center of the board do a semicircular recess for cutting and last laid in the resulting abutment with an oblique cut in the plywood with fixing screw in the slot long.To the back of the shovel are putting oval tin and through him fasten plywood shear already partially fixed handle.Similarly, the fixation is carried out when the pen shovel of the first embodiment.