Strip foundation for the fence - reliable protection of your territory

Strip foundation for the fence - general concepts

So, this kind of foundation is a monolithic concrete structure of , acts as a supporting part of the whole structure.Pouring takes place along the perimeter fence of the future.Frankly speaking, this kind of foundation are prefigured in all sectors of construction.

It is used not only for the construction of fences, but also in the construction of residential houses.The only difference between the bases of this type - it is the depth of laying the foundation.Regarding the fence, then it is applied weakly deepened foundation belt type.

There are two ways to devices like base for the fences.The first of these is used less frequently.It lies in the fact that the excavated trench, the bottom is covered with a cushion of sand.Next organized formwork , reinforcement made with the subsequent pouring of the concrete mass.

The second method is the more common and thus more commonly used.Excavate, mounted formwork and poured concrete.Speaker is the foundation from the ground up to 30 centimeters.Despite the fact that the foundation under fence tape requires great expense of building materials, and also different time consuming process, it is widely used in construction.

Materials for the base tape type

Attention!Since the choice of materials from which to make a strip foundation is great, it is a responsible approach to their choice!

suggest to consider which components are part of the foundation for a fence:

• rubble concrete strip foundation.This type of foundation is filled with standard sand and cement mortar, in which stones are added to large size.They must be at least 30 cm in length and have a mass of about 30 kg.This kind of solution is perfect for sandy or rocky soils.Often, this type of base is used for reinforced concrete fences .

Please note, if you have a section of clay soil type, the use of rubble concrete solution is unacceptable!

• Reinforced belt-type base.Is a mixture, which includes cement, sand and gravel.Previously the whole structure is reinforced by steel bars or metal mesh.Ideal choice for sandy soils.The main advantage of this type - is its strength.
• brick foundation belt type.Using the bricks in the base device for fences and possibly on the surface and beneath it.

only thing worth paying attention, because it is on quality waterproofing foundation.

• Sometimes organizations strip foundations under the fences used special plates or blocks.Their advantages are as durability, strength, and speed of installation.

the construction technology Now that you know the basic materials for the construction of the base under the fence and decided on them, you can proceed to the very process technology.We offer you a detailed sequence of actions:

• First of all around the perimeter, where it will be installed a fence, dug a trench.

Attention!The width of the trench should be 200 mm larger than the width of the alleged grounds!

• Depending on what the mass intake will vary the depth of the trench.An important role is also played by soil species.Typically, the depth of 500-700 mm.
• When the trench is dug, poured on her bottom cushion of sand.Its height should not be less than 10 cm. Sand carefully compacted.To tamper occurred maximum quality, sand occasionally watered.
• Next on a sandy base layer is laid rubble.Its height is also 10 cm. There is a tamper.
• After that, you can proceed to the construction of the formwork.As the material for it can be used plywood or planed on one side of the board.All this business carefully aligned and level for maximum reliability bursting stakes.
• After that, if there is such a need, made the reinforcement.The metal mesh or steel reinforcement can be used as materials.This will make the foundation stronger, because after pouring it becomes a one-piece construction.
• The final stage is the concreting.For this purpose, one of the above solutions, depending on the soil type, and the weight of the fence.