Worktop Sink in the bathroom

materials for the manufacture of countertops in the bathroom

use different materials, but the most popular following for the manufacture of countertops:

• natural stone.At the stone many virtues, but only two significant drawbacks - the big weight and a very high price;
• artificial stone in what little inferior to the natural one, but the price is much more accessible.These countertops are made from granite, marble and other chips with the addition of acrylic.Disadvantages - a lot of weight and a small resistance to damage;
• glass - exceptional moisture resistance, elegant appearance and the ability to give the product the most incredible forms.Disadvantages include brittleness and clearly visible water stains;



• tree - a traditional material, but in the present conditions of its popularity drop due to the fact that there are more water-resistant materials;
• MDF (fine fraction).Products made of this material may be questionable, since eventually swell and become useless.In addition, should such a plate is quite expensive;
• Polistoun (Polyresin) - a synthetic polymer that replaces natural stone, glass, plastic, wood.It is made of stone powder and acrylic resin.Countertop basin of polyresin can be operated for many decades;
• Corian is made of white clay, acrylic resins and food pigments.A unique feature Corian - invisible glue joints.This material is non-porous, and thus hygienic.Painted throughout the mass and has an incredible amount of shades;
• plastic.Resistant to moisture and temperature changes.Cons - not very durable and easily damaged material;
• countertop mosaic -nahodka for lovers of tinkering with his own hands.Disadvantage - the joints between the mosaic pieces.

countertop under the sink in the bathroom with their hands

is not necessary to spend money on expensive countertop, because to do it with their own hands is not difficult.In addition, work is a pleasure master and the joy of the whole family.

For example, you can use a waterproof panel, thickness kotoroy100mm.On the panel with the level applied shell sizes, and sawed a hole under it.Then you need to turn the panel and to the entire surface, apply a special glue, which can be purchased together with the panel.When the glue is applied to the first panel, you must put it on top of the second panel thickness of 20mm and firmly press it to the first.Glue dries very quickly, and therefore need to do everything as quickly.
Now you need to determine the flexural shell bowl.To do this, cut four strips two centimeters each.Straps attached on the shell base perimeter glue, which was used for bonding panels.
To make a hole for water drainage, requires hole saw.A hole 40 mm in diameter will be most appropriate, as it is considered standard.It is better to do first the one and then the other.Basis countertops ready.It remains to establish its permanent place, apply putty and decorated with mosaic tiles.

Forms countertop sink in the bathroom depends on the preferences of the owners.However, you must take into account the location of the sink in the bathroom: corner or regular.
countertop sink in the bathroom - a significant item and select it to be thorough.And, of course, it should be pleasing to the eye and uplift.