Cork underlay for laminate - from technology to laying on the floor

cork underlay for laminate - production technology

As mentioned previously submitted material is completely environmentally friendly.This was made possible thanks to the fact that it is made entirely of cork.It passes the grinding process, and then pressed under high pressure.Finally, we obtain a sheet having a thickness of 2 mm.It did not go into production without glue, but it is also completely harmless.

Attention!As the adhesive in the cork serves natural substrate of the component from the raw materials, which is called suberin.

It is worth paying attention to the fact that cork and other materials made of composite type.To those include:

• Bitumen cork backing.The use of this building material provides an additional layer of waterproofing, which acts as a bitumen coating.Excellent choice for rooms with high moisture levels.
• Rubber cork backing.This kind of material is used to improve sound insulation premises.

The main advantages of the material

substrate for laminate, cork knowingly received such widespread among developers.The fact that the building material has numerous advantages over other similar products.We suggest to consider the main advantages:

• Once again, the substrate is completely natural origin.
• absence of any harmful emissions to human health.
• not cause allergic reactions and is resistant to static.
• Temperature readings as well as the impact of the pressure does not affect the dimensions of the substrate.
• resistance to fungal formations, as well as to the appearance of condensate, which at times increases the service life of the material.
• has excellent shock-absorbing properties.

Attention!With cork backing, you can hide minor surface variations!

• eliminates the appearance of cracks and gaps.
• Allows you to save about 20% on heating costs.
• Gives the room a unique feeling of warmth and coziness.

now, hope you understand the reason why the material presented so popular among developers.

Mount Technology cork backing

So for flooring you decide to use laminate .We purchase the necessary material, and you have a cork underlay under laminate, which styling and will be considered further.

The first is to prepare the surface of the floor itself.Removes remnants of the old coating, as well as to remove various defects in the form of depressions or projections.After that the surface is thoroughly swept out to her there was no debris and dust.If you have a wooden floor, the alignment can be made with plywood.If you have a floor made of concrete, you can do so by using self-leveling mixture.

Attention!If the floor concrete screed, then be sure to check its humidity level.It should not exceed 5%!

After the floor surface is prepared, you can begin installation of the substrate.Joints material are fixed with construction adhesive tape, the width of which shall not be less than 5 cm is also worth considering that the distance between the underlay and the wall material -.. At least 1 cm when all the floors paved with, you can start laying the laminate.By the way, do not forget to complete the process to make the installation of baseboards !