Build Daily

Accomplishment

August 12, 2017 18:08

Making the garden paths of the cut down a tree and boardwalk

click fraud protection

How to get a neat garden paths of cut a tree?

dried out or collapsed due to the rotten tree roots usually goes into the furnace, although you can find it and other uses.For example, you are going to finally oblitsevat garden paths, but are experiencing an acute shortage of funds and tile can not afford.But is it difficult to saw wood butt and thick branches of the die thickness posed on the edge of his hand?At little cost of time and energy you'll have a great track from the cut down a tree. However, just wood laid on the ground can not be, a year later under the influence of moisture, it will turn into dust .

We need to do everything to make decorative material for paving served as long as possible, and for this we need only linseed and simple installation technique.As we make garden paths cut a tree out of more than one year, you need to somehow protect the wood from rot.To do this, we pour in unnecessary capacity varnish, put on fire and bring to a boil.Next, take a brush and carefully cover all dice hot varnish, especially paying attention to the cracks.Then, start preparing the base paths.

It is advisable at this point to build a buried drainage.But even in the absence of such, you can find the optimal solution, for example, after the markup to remove the soil to a depth of bayonet spade, put in a ditch resulting polyethylene or roofing material, and throw sand mixed with gravel.Rammed. get enough high-quality waterproofing, can only pave. kruglyashi put the first large, from the trunks, and in intervals laid saw cut thick branches.Better in the wood a little dent in the base at the end of the paving sypem all sand intervals, and that they fill every crevice - lightly watered.

garden path made of wood - use beams and boards

timber are of varying quality, including a completely worthless.They are usually trying to sell, mixed with top-notch, but when the marriage still is eliminated, come true at a low enough price.That's something they can be laid out and your garden path made of wood.If you opt for this timber, as a result you get a tightly packed deck.The base must be exactly the same as for SPIL, preparation of wood is also no different.Sometimes only a method of laying.

bars need to saw the same length and put end to end, and along the edges of the formed track, you must install curbs, paving not to disperse.Preparing the ground for laying the track, be sure to do it in the center higher than the edges, so that rain water can drain freely.On both sides of the coating can be dug into the gutter inlets.Somewhat more complicated construction plank walkways, so it will look like on your path from the boards.As the base, use an array or thicker than 3 centimeters, or timber.

Since the tree is easy to lie on a bed prepared for him from the sand and gravel, pour into a shallow trench (depth of the bayonet spade), then impregnate it previously made composition.

order to protect from moisture best mixture of diesel oil and used motor oil.The first well impregnates the wood, and the second is moisture, penetrating deep into the diesel fuel, along with the fibers.Now we are building horizontal support frame and fasten the top of the board covered with varnish.Ready wooden garden paths of the boards treated with a sealant.

Wooden track in the country - a simple solution

If you need a sturdy, even if not very beautiful wooden walkway in the country, nothing could be simpler, even no special effort is needed.To begin with let us recall what a brick.Yes, exactly, the way to the deck of the boards lying on the bricks.Or rather to the construction site where the bricks are brought on special pallets.Here they are exactly what we need.

Somewhere you can give them a reason, will be less construction waste, somewhere will be sold for a symbolic price, in any case, any significant costs are anticipated.Now just transport the pallets to the area and laid in a row, covering the pre-drying oil on top and bottom with a mixture of waste engine oil with diesel fuel.The tracks are ready.You can complicate the task of a few, if you want to bring more and beauty.To do this, dismantle pallets and are building bridges as described above.

However, since it is quite time-consuming option makes everything easier.We put two parallel logs around the stretch of sand-gravel cushion made for the track.At regular intervals in the cross crashed prepared for this gash.Top nailed boards across possible - on logs, can be along - on the crossbars.Overlaid with the sealant, and the flooring is ready, you can even walk barefoot.

instagram viewer