Nozzles on the drill : from simple to extraordinary

nozzles on the drill: a standard set

Purpose drills - drilling holes, and this hand should always be one of the most common tips - drill.Depending on the material with which to work, you can use a drill made of hardened steel, pobeditovye, diamond, the former are almost universal and apply for punching metal, wood, drywall.

The shape of the nozzle on the drill may be different, so for hole diameters from 2 to 5 centimeters is best to use a drill pen (the name is they got out of the relevant circuit).

working with soft materials on a drill, do not press hard, especially when it comes to drywall - you can eventually get chipped or cracked edges of the opening.

When you need to cut large holes in the lumber, nothing will help in this task as special nozzles - crowns.They are cylindrical drill with toothed edges, that is really resemble the crown base which are not kings head and drives a rod in the center, through which nozzles secured in the clamps and the drill chuck. for concrete used special drills, with a triangular tip of a solid mild steel.

Additional features

drills What often encountered in the finishing works - is perforation of concrete and tightening screws.With both of them will help you handle the drill, which must be the punch mode.Screwdriver This tool can be replaced with a special switch lever to position "drill only" with setting the minimum number of revolutions per minute.

Almost all models have the latest drills reverse, which allows spinning and twisting screws at low speed.When working with concrete surfaces perfodrel - an indispensable tool, because the rotation of the drill bit along with a simultaneous translational movement gives the result in no way worse than the work of an ordinary punch.

However, the diameter of the drill hole is somewhat smaller, there is a certain limit.Nozzles are used to perforate the same ones for concrete, mentioned above.Their triangular lugs are ideally suited for drilling hard materials.

And a few more features to drill

Mix the plaster or other liquid mortar - a tedious task, but with the help of a special nozzle drill may turn into a mixer, most importantly, that it was long enough and sprays do not fall on the tool body.By the way, you can drill and conventional dough whisk, putting it on the minimum turnovers.

Working as a drill mixer, do not forget that it is governed by the basic rule of the household appliance - removing the nozzle from the mixture should be only after a full stop of rotation cartridge.Less frequently used nozzles - a kind of adapters that convert a drill in completely different tools.So, there is a cap, which, when mounted on the cartridge will operate as a jigsaw.

There Flexible drill on a solid a rope, they can be used in confined spaces.On sale you can find the nozzle adapter, which turns into a drill grinders, more precisely, it is the angular chuck that allows a nozzle at right angles to their normal position.For cleaning and polishing surfaces are very comfortable grinding heads, abrasive and made a stiff wire brush.