Mosaic plaster as the main decorative material in interior decoration

Application of mosaic plaster

applied decorative mosaic plaster on well prepared surface.The walls must be leveled and free from dust, dirt, bitumen and grease.Align gypsum walls can, cement, lime-sand plaster.Alternatively, you can align the surface of the drywall.

By leveling process should be taken with full responsibility as applied mosaic plaster is a thin layer.And if the walls were not aligned, it will be visible to all sorts of flaws and the curvature of the walls, which ultimately only spoil the appearance.It is worth noting that this should not be applied to heat-plaster and lime plaster, as well as on the walls, which are made of artificial materials.

Mixing

If you will use a mixture of dry bags, then it should be prepared to work.Poured some of the material in a bucket filled with water and mix malooborotistoy drill.Proportions of plaster material and water for mixing on the packaging.If it is already ready to be used in a mixture Placing banks, it can be used immediately in the works.

way, ready mixture banks better and better dry as proportion and consistency calculated by technologists at the plant.A mixed quite accurately in compliance with all the rules with the help of special tools.Thus the ready-to-use plaster mosaic will not be different in texture and shades, which can not be said about the dry plaster for manual dilution.

consumption plaster depends on the size of the crumbs, granules.The larger the pellets, the greater the consumption of material.Each package is always specified flow mixture per 1 m2.On average it is about 3-7 kg per m2.

Application method

As already mentioned, the application of the mosaic plaster is assumed on a flat, dry and well-primed surface.You can also process base "plaster lining weight" for better grip (adhesion).

application of plaster by using a grater, which is made of stainless steel.Application method is called the "wet on wet".With this method of drying is not allowed jammed parts before applying a new one.Screed layers of plaster trowel so that the layer thickness is equal to the size of the grains.

If you do not use this method and allow to dry the first part of Damage of plaster, and then apply the second part, it will be visible to the joints.It spoils the appearance and aesthetics of the coating.

plaster drying time depends on the type of surface, relative humidity and air temperature.On average it is 12-48 hours.In conditions of high temperature and humidity, drying time may be longer.