As a self- connect the wires in the junction box

Why junction box

junction box provides easy access to places of connection wires.Allowing to quickly find and fix problems, add sockets and switches.Also, what is important, the design provides fire safety.

Methods of wiring in the junction box

There are several methods of bonding wires, but the main rule in any type of connection provides that the compound should have a good contact.

main ways to connect:

1. Stranding;
2. Pike
3. opresovki;
4. Welding;
5. Screw terminals;
6. Self-clamping connections.

consider in detail each of these types, try to choose the most optimal and efficient.

Twisting wires in the junction box

Stranding - simple but unreliable connection method.It can only be used as a temporary measure, since it does not carry heavy loads.This type of connection with loads and heating weakens.

To seal by twisting the wire, it is necessary to start to clear cables from insulation, then twist the fabric of each other.This can be done both hands, and using pliers or a pair of pliers.After finishing work, the compound is isolated.

Pike as a way of connecting wires

soldering can be used as an independent method, and in addition with a twist.

This type of compounds are well suited and will reliably serve only if the wires are not heated and not subjected to mechanical stress.

To take advantage of this method is gentle soldering iron, solder and rosin, sandpaper.

When soldering process is necessary to ensure that the molten solder into the pocket twist.

Welding

This method is robust enough as it turns solid cable in the process.

For the application of this method would require additional equipment: welding machine, electrode flux.As well as protective equipment (gloves, goggles) and skills to work with welding machine.

How to connect the wires using crimp method

opresovki allows you to securely fasten the wires.To do this, take a connecting sleeve, selecting it depending on the material from which it is made and the wire diameter.Compression assembled structure is carried out pressing jaws.After crimping, the bonding place must be insulated.

Screw terminals as a way of connecting wires

advantage of using screw terminals is their ability to bind the wires of different materials.This method of connection is very compact and easy to use.

How to connect the wires in the junction box: Self-clamping connections

By cleat compounds include terminal blocks and connectors WAGO-.

Today, these methods are most appropriate, combining the reliability, ease of installation and low cost.

terminal blocks are small and fit easily into the junction box.The block is made of soft plastic, so easy to install.To install the pads it is necessary to pick up on the diameter of the living, then insert the wire into the terminal and tighten them with a screwdriver.

When using WAGO-connector will be enough to insert into the slot pre-stripped wires that are locked without any additional effort and tools.With this method it is possible to fasten cables, made of different materials.

advantage of these options would be no need for subsequent isolation.