Fixing to the wall of the pipe

Quality of PVC pipes

the production of PVC pipes using a material that has a number of positive properties, namely:

• resistance to degradation caused by aggressive media such as acids and alkalis;
• durability in operation, water from PVC pipes does not require replacement of the next 50 years;
• low cost of the pipe and components to connect the elements of the pipeline;
• ease of installation, manufacturers of pipes made sure that the mounting process has been simplified as much as possible.PVC material may be combined with pomoschyue seals or just stick together.

Among other things, this high-tech material makes it possible to pass the water pressure up to 10 MPa in pressure units, and not only in the domestic lines.

fastening technology PVC pipe to the wall.

Before you begin the process of fixing the pipe to the wall, you need to connect all parts of the aqueduct via the socket, flange connection, or by using special couplings.Then proceed directly to the fastening pipes to the wall:

• marker plot the layout of the pipeline location;
• an electric drill holes for screws with dowels;
• holes in the clip for fastening insert plug, and tighten it with a screwdriver, and then hammer;
• in the attached clip mount PVC pipe.

conduct assembling PVC pipe conduit can be at a temperature no lower than + 5 ° C.

Proper mounting of pipes to the wall is necessary not only to secure the water pipe along the wall, but also to ensure the tightness of the entire sewer system.Collapsible plastic clips or clamps can be mounted on the wall prior to installation of the pipeline.This mounting system not only simplifies installation and repair of PVC pipe as a broken portion can simply be removed for repair or replacement without the need to dismantle the entire water system.

details for fixing pipes to the wall.

PVC pipe is attached to the wall in two ways - inside and outside the walls.For the installation of the pipe is necessary to stock up on the following tools and parts:

• electric drill;
• hammer, screwdriver set;
• hacksaw for cutting tubes;
• level and tape measure;
• plastic clips or clamps for fastening pipes to the wall;
• set screws with dowels.

In order deal with fasteners.Plastic clips are made of heavy-duty nylon to withstand temperature fluctuations and are commercially available for securing a pipe, and double - for the installation of a pair of pipes.When purchasing these assets should be considered for fixing the pipe diameter and the step size is set between clips.He is the main indicator of reliability of fastening of the whole system, if it is very large, it is possible deflection of the tube at this point.Step size depending on the diameter and temperature indicated in the table:

Mount plastic pipes to the wall with clamps used for the installation of large-diameter pipe.Lugs produce a turnbuckle with a rubber seal in the middle.This seal provides protection against mechanical conduit vibrations and secure mounting to the wall.The design of the clamps have a stud with a dowel, which can be adjusted by mounting:

• maximum tightening the clamp around the pipe, get rigid connection, which eliminates the possibility of displacement;
• movable mounting is ensured by the gap between the collar and the pipe.Such a method is required for possible expansion of the material with increasing temperature.