Build Daily

Building Materials

August 12, 2017 18:08

Socle tiles - effective zone for the home

click fraud protection

What a facing material can serve as a plinth tiles?

Many prefer the most durable, even more expensive materials, and among those recently took clinker tiles.Passed through the temperatures reaching 1250 degrees, she is not inferior to its durability and decorative bricks may well imitate it, being laid on the basement of the building.Thickness of 8 to 17 millimeters, this lining is very light and therefore will not crumble under its own weight after a short period of time.

Finishing the basement of the house by concreting less durable than the tiles cover, since the latter, even if it is a natural stone absorbs moisture worse than concrete.

very beautiful, although less reliable, finishing natural stone that can be sawed, as the plinth tile, flat boxes, or have a natural shape.Note, however, that the stone absorbs moisture and with time under the influence of moisture and temperature fluctuations begins to break down.

But trim tile granite plinth, which also has a short and succinct name Gres, the influence of time is virtually impossible.The fact is that since the density of this material is extremely high, the cavities in which moisture could get practically absent.

As laid clinker tiles for plinth?

The fact that we have used as an example Facing clinker tiles for plinth, does not mean that the below described method of stacking is not suitable for other materials.In the same way it can be carried out and stoneware floors.So, as usual, it all starts with the careful preparation of the surface of the walls, which should not be more than 4 mm lugs.

if any, take the cement-sand mass for balancing (better with plasticizers to frost) and its thin layer, smoothing the surface to perfection.Next to the basement are planned series of lines, so that was taken into account and the seams between the tiles. to the first row has been laid flat, it is recommended to fill the guide rail on which and will glued tiles .As for the process, the plinth laying tile is extremely simple and does not require extensive experience.

Clay gently distributed over the first portion of the trim smooth surface spatula, and then the gear, so as to obtain a thin layer with horizontal grooves.Then, the cap facing clinker tiles, which is applied to the adhesive mass and low-energy by pressing is pressed into it.The last thing is done grouting.

Facing the cap tiles, the secrets of compatibility with the front trim

Apart from the practical side, the aesthetic factor is present in the decoration of the cap, which can not be ignored, otherwise the result will be absolutely impartial.In other words, need to pay attention, as the tiling of the cap combined with wall coverings .

For example, if you base concrete, and above it rise the log walls, decorate the protective belt home ceramic tiles is not recommended, the effect will be counterproductive, but artificial or natural stone is suitable for this purpose well.

stoneware tile same as, indeed, and clinker, is perfectly in cases where the walls are covered with clapboard.With respect to the visual effect of natural stone, along with artificial visual weighting used for building construction.

tile having a clay-based, or just a small thickness as gres and clinker used for building looked air, facilitated.The neutral plastered walls can be shaded by the cap as natural stone and granite.

instagram viewer