Houses of calibrated logs : reality tale

detail about

material to deal with all the ins and outs of these homes, you need to understand what is material.Calibrated timber - a tree which is processed mechanically milling system.The output is a common timber with an equal diameter.They are produced from coniferous trees (spruce, pine, cedar).

used mainly logs with a diameter of 18 cm to 26 cm, but this largely depends on the climate zone.After calibration is done trimming, the production of locks and grooves.As a result, all the logs are fitted with minimal gaps between them, which creates a good thermal insulation.The material is treated with a mixture of protection from fungus, mold and to improve fire resistance.

The advantages of this material are undeniably environmental cleanliness, lack of the need for further finishing and high thermal insulation qualities.The disadvantages include possible incorrect configuration of the slot and the cup.If this was a mistake, then correct it will be in place.Also calibrated logs have less sapwood layer, in comparison with chopped log.This affects the appearance of cracks over time.

Important!To all the material perfectly formed, trust his choice is only professional.

importance of material selection

Quality log houses from calibrated logs are obtained far from each log.The main thing - is the moisture content of wood, since the structure of the timber is subjected to natural drying.During this process, cracks are formed lengthwise, the material shrinks, resulting in reduction in the height of the house.

Note!Rough timber or poor calibration in the future could have a negative impact on the construction buildings.

Poor cylindered logs are irregular shape, which affects the fact that they are not flush against each other.The result is reduced thermal protection, and wood dries faster.Smooth shape ensures that no deformation of the material during the drying process.

correct shape allows to use the technology, proven over centuries, with greater efficiency - laying on hemp or flax. This technology makes it possible after shrinkage of wood and re-produce konopatku pozakryvat space between the joints.

Advantages of calibrated logs

Building a house or baths of calibrated timber allows you to do a minimal amount of equipment and machinery, which saves money and preserves the landscape.House made of such material is collected, as a constructor, at the expense of the same size mounting plates and landing slots.

As a result, it remains only to put the house on the foundation.Fundam also sits on a shallow depth, which requires much less concrete, which in turn, reduces the cost of construction.The main advantages of the construction of the «calibration»:

• Preparation of materials and construction process itself is simple and quick;
• Enables implement any project, because the logs are joined at any desired angle;
• low heat conductivity - wood holds heat well, allowing you to make the wall a few times thinner than a brick;
• resistance Wednesdays from chemical aggression.Wood is inert and does not enter into chemical reactions;
• Economy.The simplicity of construction and the lack of necessary internal finishing saves money;
• long time operation;
• Environmental cleanliness.