How to remove the sealant - construction Tricks

Difficulties in removing sealant

the rubber mixture to scrub the surface is not so simple, its constituent additives can be firmly secured on the surface, without succumbing to the usual water remover or mechanical stress.Rinse sealant needed in case it accidentally hit the surface, and if the composition remain on human skin.

Experts recommend to work with the sealant to protective gloves, but if he still gets on your skin, you should immediately treat the site with rubbing alcohol or gasoline, and if the sealant is not separated further using a three-percent solution of vinegar.

To understand than Sealant scrub, one must take into account the fact that the composition of a well-grasped, and to separate the frozen mass of independently using the available tools is simply impossible.

How to remove the sealant from the surface?

Skilled builders find ways out of the most difficult situations, when you remove the sealant, you can use two different methods - mechanical and chemical

.Often the means to remove the sealant is simply impossible, in which case you can try to start to remove the residue with improvised tools.

Bearing in mind that just because the sealant from the surface will not separate, it is necessary to cut the bulk using a knife or blade, in the latter case, we must act particularly carefully.After the bulk is removed, you can proceed to clean the entire surface, it needs to take a special tool.

not have any confirmed the recommendations than to dissolve the silicone sealant easier and safer, but in most cases, builders and landlords working with special silicone solvents that produce company lugat , Quilosa and many others.

Typically, such compositions are securely packed in cylinders and are aerosol or paste.

If it is not clear how to remove the sealant from the tiles, it is best to carry out the test: apply a little solvent to the surface and look at the result.If the paint tile remains in place, and he does not lose the original look, tool can be used safely for working with sealant residues.

Remove the sealant from its skin

questions than clear sealant that is especially true when the mortar gets on the skin of a person.As part of an incredibly fast attached to the surface, remove it will not work without help.Without fail the affected area is wiped with rubbing alcohol, if it is not found, you can use ordinary vinegar, a percentage which shall not exceed three solution.

answer the question, how to remove old sealant must be a health worker, previously encountered a similar problem.As a rule, experts select the optimal composition-solvent that is minimally traumatize the skin and allows it to recover quickly.Quick response and prompt action in addressing the removal of the sealant with the skin - something that can save her beauty.

learn than to wash the sealant, it is necessary in advance, before you start to work with the staff.Presence information helps to avoid mistakes and unpleasant consequences.Carrying out the work in special protective gloves and observing all precautions, you can rely on to protect yourself and your health.