Sticking vinyl wallpaper correctly

Many do not know how to glue vinyl wallpaper, and so avoid buying the material, opting for already scanned paper wallpaper.

But in fact, in the process of applying them to the wall is no big deal: the main thing to know the subtleties of the work, and then you may well be able to deal with the sticky vinyl wallpaper with your own hands.

A look is coated in a bedroom and other rooms apartments are much more attractive than usual.

In this article you will learn about the features of this material, its forms (wallpapers, coating under the paint) and get step by step instructions and video as stick vinyl wallpaper.

There are two types of vinyl wallpaper: on paper and cloth (non-woven) basis.In this article we analyze in detail how to work with each of them.

paper substrate

Chances are, you already know how to glue vinyl wall paper, even if never done this before.

fact that the process is very similar to conventional paper wallpaper gluing, and although a number of differences.The most notable of them - the size.

Vinyl wallpaper meter, which is almost twice the size of a standard coating.

Pros vinyl material durability - life of 10-15 years of wallpaper, as well as the ability to clean and wash them without damaging the coating.

Video:

technology gluing vinyl wallpaper of any kind begins with the preparation of the walls.

Since the coating paper-based thin enough, you need to pay attention to surface preparation, coating to look smooth and beautiful.

first step is to remove the old paint and glue, in which it was held.Then fill all the bumps and bulges to become completely flat surface.

This can be done putty or, if the deformation is significant, with the help of drywall.

After leveling the wall to be treated with primer, which provides better grip with the surface material.

process of preparing the walls can be seen in the video, this is no big deal, and you can easily do it with their own hands.

Before you start pasting, adjust the room temperature: in the bedroom, living room or any other room where you kleite coverage, there should be a draft and excessive humidity, asotherwise it will not hold on and just move away from the walls.

Before starting to work with the wallpaper, prepare the glue, becausehe will have time to swell.

Dilute it should clearly follow the instructions on the package, and then leave for 10-15 minutes.

At this time, you can prepare the material:. Meter wallpaper should be cut into desired lengths webs leaving an allowance of 10 cm

After cooking, add all the stuff down pattern so that it matches.Cut material should be, also referring to the picture on the canvas already cut off.

When the glue is ready, you can apply it to cover.Thick layer of glue is applied becauseVinyl wallpaper are heavy meter.

Video:

After applying a layer of material is set aside for a while, becauseif the glue immediately, it will not stick to the walls.After applying the glue to the middle of the wallpaper roll and leave for a while.

While preparing wallpaper, can be treated with another cloth.The waiting time can be found on the packaging - for different models it can vary and depends on the thickness of the coating.

Since after applying the adhesive wallpaper fibers swell, and the material is stretched, make sure that the preparation time was the same, otherwise the web will be of different sizes.

Now we can talk about how to produce sticky vinyl wallpaper.

process is very similar to the gluing paper wall-paper, but fully cope with their own hands will not work - otrez meter wallpaper, missed glue, heavy enough, so you need an assistant.

One person should fix the wallpaper on top, making sure they are positioned precisely, and the other is to keep the lower part, so that the coating has not stuck to the wall.

better to remove the baseboard before work, becausewallpaper will come to it.

Once the fabric is fixed, it is necessary with a roller to remove air accumulated under it, moving from the center outwards and downwards.

Gluing material from the start corner of the room, but the angles at the same time glued to the last.

angles should be covered overlapped, ie,material must find them a few centimeters.

angles, sockets and other difficult places are processed last.Outlets can be removed - so work will look neater, and make it will be easier.

Video:

adhesive extending over the wallpaper, you need to remove a roller or a cloth, without touching at the same outer side of the fabric, otherwise the stain will remain.

Once the work is finished, you need to trim the edges of the material above the floor and the ceiling, so that it was exactly.

Use a sharp knife, and do it quickly, otherwise the line will turn out uneven or tear wallpaper.

flizeline basis

Its characteristics meter wallpaper on non-woven based on several superior analogs with a paper coating.

Firstly, they can be applied to a wall coated with adhesive, while no promazyvaya material itself, which is much easier to work with them.

Secondly, the coating has a leveling properties - of course, if the wall is very uneven, the coating is not hide, but minimal defects may well eliminate, due to the large thickness of the material.

This type of vinyl wallpaper can also be washed, which prolongs their lifespan and preserves the original appearance.Brushing can be conventional vacuum cleaner during cleaning, and then wipe with a napkin.

Finally, the design options in a non-woven wallpaper basis more - you can buy material for paint, wallpapers, textured wallpaper with a raised pattern (they are made of foamed vinyl).

This coating can often be found in the bedroom or living room.If you choose the wallpaper under the paint, you can update them up to 20 times.

so many paint layers usually do not, but they are guaranteed to 2-5 colorations withstand.

so you do not have difficulty with how to properly glue vinyl wallpaper on non-woven basis, before the work is done on the wall layout.

Photo:

This is especially important if you choose wallpaperscoating or patterned or marked with a pattern.

It is important to dock the web where there are corners, doorways and window slopes, becausein these locations will be most noticeable drawbacks.

When you do layout, the angles and the web must divide the distance of 15-20 cm, so that you can make an overlap on the nearest wall.

To work with the meter non-woven wallpaper basis you need a special glue, which is sold in DIY stores.

It is stronger than usual and able to hold the heavy stuff, which weighs much more than the usual coverage.

Dilute the glue with water, and within ten minutes, the mixture is ready for use.

Glue should be applied only on the wall, not the material itself promazyvaya, though for better fixation can be treated and coated in the corners.

meter Non-woven wallpaper is better not to share on the web, becausethis will only complicate your job.

gluing can be done by hand as follows: Lay the roll on the floor, and then take the edges and lift to the baguette, aligning the material on the contoured lines.

After you make sure that the blade is sharp, you can stick it on the wall.The process of how to glue vinyl wallpaper, can be traced to video.

Video:

When wallpapers are fixed on the wall, it is necessary to remove material from under the excess glue and air bubbles that have stayed there.

This can be done using a plastic spatula, moving from inside to outside and from top to bottom.Do not be afraid to press the material, becausedamage or stretch it difficult.

To create a junction between wallpaper and ceiling moldings, pressed into the material needed in the corners between the wall and skirting board with a plastic spatula.

If the blade comes to a plinth, the excess should be cut with a sharp knife.But it should be done on the lines to the cut turned flat.

also glued and all the rest of the web.Do not forget that you need to glue the overlapping corners, as well as configure the joints so that the image on the canvases coincide.

Video:

on the curb and ground friezes material should be glued back to back.

A particular problem may arise with radiators, sinceto seal the space behind them, especially if it's wallpapers, not very convenient.

Many solve this problem is simple: pick a paint that is suitable in color to the coating and paint over the wall with it.

If you want to seal the space is wallpapered, the web is cut into small pieces of about 10 cm and stick them on the wall with a roller with a long handle.

This work is complex and tedious, so it is better to choose the paint - it is much easier to apply.

Before you begin, be sure to watch the video, how to glue wallpapers and other types of coverage - it will greatly facilitate your work.

When papering over, close the windows and doors, and do not include air conditioning (before starting work, disconnect it), becausedrafts can ruin all your work.

Photo:

wallpaper on non-woven basis differ attractive and varieddesign, moreover, they are unpretentious, so you can place them in any room of your apartment: the bedroom stick wallpapers for living room, you can choose wallpaper for painting, but in the kitchen and the hallway wallpaper paste with an unusual pattern.

The only drawback, which have a meter vinyl wallpaper - they do not breathe, but it does not affect the quality of their operation.

most important thing - to figure out how to glue vinyl wallpaper on non-woven basis.

important to be coated properly (in this video will help), then no matter what type you choose wallpaper (wallpapers, under the paint, on paper, etc.) in any room of the apartment, new with their own hands, the materials will look like,as if the repairs done professional.
Video: