compartment cabinet with his own hands Building

It just seems to make their own hands closet incredibly difficult.

In fact, this structure can be set up easily on their own, such as plasterboard.

It is very popular in the modern surroundings of the apartment.

cabinet, opened the doors on the train, a unique design and takes up a minimum of space.

doors of this design reveals no plowing and pushing the sides.

why they like the owners and elegant, and small apartments.The mechanism extension flaps is shown in the photo.

Species wardrobes

Wardrobe may look different, depending oncapacity building.

cabinet design, located in a niche is simple and does not require a lot of material, because of its bottom, top, side walls have already been made.

Making such a cabinet arrangement involves only door that does not take any extra space.

Wardrobe can be constructed between the two walls.It is similar to the option above, but is deepening all the wall completely, as seen in the photo.

Photo:

This cabinet is installed in apartments of small size, so that it takes up little space.Another advantage lies in the fact that the flaps can be arranged so as to expand the area of ​​the room visually.

Sometimes wardrobe put in deepening partition between the rooms.It is also a very convenient option for monolithic buildings.Wardrobe can be made in the doorway room divider.

Its design can be trimmed inside with the help of the CPD.This material is inexpensive, strong and durable.

much more difficult to make a corner wardrobe.On it will take a lot of stuff.Corner cabinet is constructed on a more complicated scheme than the already listed species.Its not an easy design shown in the photo.

Photo:

very difficult and expensive design - sided cabinetcoupe.He shares the room into zones.It can be set in an elegant mansion, even in an apartment in the 2 rooms.

This cabinet has a door and unusually decorated.The most important thing - it can be approached for things from both sides.

Such devices for storing things you can put in any apartment.Furniture created by yourself, do not hurt the budget.

Some manage to make the built-in sliding wardrobe with their own hands, not only in the hall, but in the closet.

Wardrobe, which opens the doors of the train, constructed of different fabrics, and popular to do it from the drywall.

How to make the correct calculation?

calculation - the first thing that needs to be done on a mandatory basis.First, determine where it will be the next piece of furniture.

To correctly calculate the required materials, it must be remembered that the design makes the depth of 50 cm, with 8 cm occupy sash.

The width of the cabinet should be a meter or more.We must start from the standard sizes, but it is not always possible in a modern apartment, which can be curved floor, ceiling and walls.

Do horizontally irregularities checked by a building level.And if there is no error in the vertical, looking through the plumb line or the same level.

Tips can be found in the following video.

Video:

Suitable materials for the construction of this design are considered particleboard or chipboard, although it is now popular to build cabinets of plasterboard.

When a size is determined, the calculation is made, it is necessary to cut materials, avoiding errors in centimeters.

is important to cut the matter with a stock, ie, greater than 2 or 3 cm. Then the sheets will be easier to adjust.

Carrying

drawings are very important dimensions of the door.Wide doors difficult to open, narrow - unreasonably expensive construction do.

Incidentally, if the furniture is made of drywall, the leaf will have to do separately.

It does not matter where you will be given a piece of furniture, you must first calculate everything right, and then to build it correctly.

Since the doors are in contact with each other, they should be the same thickness as that of the profile, about 4 centimeters.A sash width must fall within the scope of 60 to 90 cm.

should definitely make drawings of the space inside the structure, not forgetting about the thickness of the walls.The distance between the shelves, as the experts advise, be in the range between 30 and 40 cm.

suitable height of places where things are hanging on hangers, equal to the length of the thing itself, plus another 10 cm.

bar for hangers arranged on shoulders.If the future wardrobe is full of clothes, it is better to use a pantograph.How to use it, show many videos.

Video:

not recommended to create boxes for clothes is very wide, it is necessary to consider, still producing drawings.Permissible depth of drawer - 50 to 55 cm, 60 cm - is an extreme measure.

By all standards at the top of the cabinet are planning to make a shelf with a maximum length and a width of half a meter.

And the rest of the space is divided into compartments underneath.How to calculate, show the following schemes.

Photo:

Available sizes branches

Everything inside must submit drawings that will perform the calculation everysmallest details.

There are some practical tips to help you not to get confused with the size and make the right calculation.

elements inside the structure are created, given the number of valves.If these two sections must be the same number.

exception may be very wide compartment doors.However, they should not have a width of more than one meter.

According to the instruction, focusing on which the internal filling, the bar makes a long within the shelves somewhere in the half.

make calculations, we must proceed from the size of the enclosure.But the usual boom length - 0, 9 meters.

parcel shelf, as a rule, do such that the gap between them is about 40 cm If the shelves are intended for books, their acceptable height -. Minimum 20 cm, maximum 35.

It is very important to calculate.

Video:

If the cabinet for the hall, where it will hang outerwear, such as coats, the bay with a bar must have a height of half a meter.But the dresses will be enough height of 80 cm, can be a little more.

If the plans of the cabinet will be filled as much as possible, it is better to collect it with a width of 70 cm. Make the cabinet even wider is not recommended.

When the shelves and the bar is very long, it is best to put the partition that they support construction.

bulkheads compartments better placed in such a position that they were close to the edges of the leaves.If skid mounted 2 doors, it is logical to do narrow cell.

design shall be such that the middle of the compartments provided in a remote area.

design, calculation and production are carried out so that the drawers are not undertaken in a remote area.Leaving them in the sides of the structure, it is possible to face the fact that the boxes will not be nominated.

In addition, the drawings should reflect the layout of elements on the chipboard.At the design stage it is important to calculate and how many accessories you will need.

Making wardrobe alone will require metaboxes, sliding racks, baskets.Also needed are plugs, screws and furniture corners to install shelves.

assembly design

When the circuit thoroughly investigated, and the calculation is made correctly, you can proceed to the construction of the enclosure of drywall or other material itself.

Manufacturing and assembly begins installing the external walls, if they are available.

Other details fasten in place throughout the work.The outer wall, bays and racks are attached using a profile with the letter n.

assembly process can be seen in the photo.

This profile will mask all the flaws of the wall.After that, the profiles have to hoist the rack.This will help small mallet and board.

Then it's time to collect the mezzanine.To build it, set horizontally on racks U-shaped profile.How to make the cabinet at this stage shows the video.

mezzanine hoisting on the profile, noting the location of the bottom shelf racks.Then the shelf must be removed from its place.To it is necessary to attach a profile, so that there were racks.

remaining area is filled with what you need.Shelves mounted on special places.

Video:

Guides doors

The instructions on how to make the built-in closet with their own hands, are important guides.

They should be mounted at the top and bottom of the opening, to build and angular, and a standard built-in closet.

very popular to do the following: to establish a two-rail system with lower support, two-rail with an upper support or mnogorelsovuyu.

What stops the landlord, depends only on its finances.

it is preferable to collect the bottom rail.This is because the system is the most reliable.Pedestal rollers are at the bottom and top elements are not allowed to go beyond the door design.

Note the photos and videos in our article that shows how to make a closet with his hands.

If mounted rails, shutters do not touch each other when the door is opened or closed.It is better that the rollers are made of polypropylene.

Mount them in special nest is very simple: The upper roller is inserted into the rail groove, slightly lifting and lower inserted down without any problems.

top rail design, as seen in the photos, especially.Suspension for the door is transferred to the upper rail support, which is fixed to the ceiling, does not settle and does not accumulate dirt.

this hardware cost is low, and to collect it, it is not necessary to make a great effort.Its installation is different only in that the door must be slightly tilted downwards.

disadvantage is one: with a strong push of the door falls into the design, as the rollers at the top do not differ necessary rigidity.When

made monorail, each carriage has two pairs of wheels and suspensions are moving in their doors.

But this cabinet can stand only in rooms where adults live, as they must be used with caution.

This furniture is not cheap, but it makes a big flap and cabinet can be placed near a blank wall.

Installation does not require leveling the ceiling or floor, however, require a lot of effort.The rails will need to insert all of the carriage on the rollers, and then fix it on the ceiling.

Only after these steps, you need to attach the door.

for mounting such a structure will need helpers.Besides hardware will need to decorate a decorative plate.When

corner or built-in wardrobe got picked, it is time to set stops, the doors do not come into the movement themselves.

Wardrobe made of plasterboard

Wardrobe Plasterboard is so popular, because this material is lightweight, it is very simple to operate and open up new construction opportunities.

But to build a wardrobe of drywall, you need to make a reliable framework on the basis of the profile, which is shown in the photo.

But as a result of the cabinet, made of gypsum board, you get a very handsome.

Make it look aesthetic luting help and decoration.This video will tell.

Thus, to calculate how much material you need, and accessories, and to collect a corner or regular walk-in wardrobe is fairly easy.

only plasterboard should not do sash for them pick up another, more durable material.A corner or conventional cabinet without doors can not be called a wardrobe.

Video: