A pond in the country with their own hands

Building a pond with his own hands will bring a pleasant variety, perhaps, in any landscape.The existence of such a reservoir would allow plant new plants, surround yourself with a special atmosphere of comfort and completely transform the suburban area, making it a key element.It will be especially nice if you build a small pond with his hands.

Before starting the construction of the reservoir, it is necessary to properly select its location.The best place to be located in the lower part of the plot.At the same time it should have good lighting throughout the day.It is also desirable to nearby were large trees, as falling leaves will pollute the pond and powerful roots can break the waterproofing.An artificial pond with his own hands can be of any shape, which depends only on the imagination of its creator.This can be a pond with clear geometric contours or outlines of the free.The depth of the reservoir at the same time must be greater than 0.5 m, and in the presence of fish - more than 1.4 m

reservoir base

To build a garden pond with their hands, you can:.

1. From ready-made plastic mold.

This method is the easiest, but only suitable for ponds up to 8 square meters.m. These tanks are available with any parameters.Shape Plastic fairly steadily moves winter time, it is not afraid of direct sunlight, mechanical damage.

2. From film.

This solution is more flexible and allows you to make the pond any shape.It is enough to pave the excavation and waterproofing of the film.In this case you can manually modify the project during implementation.

Materials

Step by step instructions for creating a pond with his hands

So pond plan is ready, with the location defined, with the tools available material.Consider the stages, how to make a pond with his hands.

1. Using a rope, carry out on the ground markings, and then trying to drive stakes.

2. You can now mark the contour of the future reservoir.To do this, mark the perimeter making the cut sod with a shovel.

3. You can start to dig a pit on the existing scheme.For large size better to use an excavator.

4. When the pit is already excavated, the bottom should be inspected carefully.There should be no sharp stones, debris, tree branches or anything that could disrupt the film integrity.

5. Level check the angle of inclination of the coasts.They must be in the same horizon.If necessary, they will need to align.

6. The surface of the floor must be covered with a layer of sand of about 100-150 mm.The angles of inclination of the terraces with steps should be slightly sloping.After the laying of the sand must be carefully compacted.

7. On top of the sand is laid with overlapping geotextile as a protection coating made of PVC.

8. Next, the film thoroughly crushes the entire bottom surface.At the same time the rest of the outside edge is fixed with stones.

9. Do not rush to cut too much.It is better to wait for the pond filling as a coating of PVC takes the final volume somewhere a day later.

10. cropped on the edges of the film.You can begin decorating shores to hide the film remnants.

11. Now you can set the pump to the pond, as well as connect to the bank of the filtration system, mask tube inlet and outlet water.The purified water is better, for example, run on the rocks brook or a small waterfall.

12. Go to the landing of aquatic plants.For the convenience of planting different types of plant terraces were originally provided.It is also possible to plant oxygenating plants (Bog, hornwort, etc.).

So pond at the cottage with his hands ready, you can settle in to his tenants.

Photo pond with his hands

See pond pictures made with their own hands

Video create a pond in the country with their own hands

offer look for clarity, video, how to makepond with his hands: