Swimming pool made ​​of polypropylene with their hands

pool of polypropylene has a number of advantages: it is not necessary to paint every year, to deal with leaks.Ease of use, attractive appearance - these are the main reasons for which many aspire to build a swimming pool made of polypropylene with their own hands.In addition, a separate installation saves on professional services.

pool Drawings polypropylene

excavation

installation of pools of polypropylene being below ground level if the cup has an arbitrary shape, it is necessary to deepen completely.Therefore, first dig a trench whose dimensions exceed the dimensions of the pool about a meter on each side and 50 cm deep.This technique allows you to subsequently mount the cup, the water supply without problems, develop plums.

Further, it is desirable to fix the elevation to know where to side of the pool.This mark - way to correctly determine what should be the depth of the pit.When excavation is necessary to make it even more deeply on two feet, to build a concrete pad.First, the bottom of the poured gravel, so he did not go into the ground, and then make a layer of reinforced concrete.

Installation

the pool If you decide to get a small bowl, then the question of how to make a pool of polypropylene should not occur.It will cook a bowl in the shop with the help of special equipment, and in general will take on the form of land.But if you decide to arrange a spacious bath house, you have to connect the bowl in place.To do this, you must learn the basic types of welded joints, which are used when working with polypropylene.You should also buy a welding extruder nozzle to it and heat gun.The equipment is not cheap, but if it is necessary to make the pool self and neighbor, we can divide the purchase price in 2, then such a purchase will cost more profitable than hiring a team.You can take the necessary equipment for rent.

first welded bottom, it is advisable to put on a concrete pad geotextile, and then extruded polystyrene.Seams are processed in accordance with the recommendations penopropilena manufacturers.Welding bead should be carried out on the inside and outside (double seam).In outdoor applications take welding nozzle, with external - polypropylene rod for soldering.

When the pool bowl of polypropylene is ready, it is necessary to mount the stiffener.How do they look, you can see in the photo.

pool equipment Installation of polypropylene

next step how to build a pool of polypropylene - is the installation of the hydraulic system.This pipe, bottom of plum, water return jets.Each pool is equipped with an autonomous closed filtration system.From the skimmer (the device to take water) used water goes to the sand filter after cleaning it returns back into the pool.If you wish to set for water heating appliances, lighting equipment, settling counter.

hydraulic equipment can be installed in a separate room technology, including in the system all the necessary appliances.

Completion with a bowl

When polypropylene pool installation is over, everything is set up, filled up the space around the bowl.It is advisable to assemble the formwork and concreted this space.When pouring concrete solution must make sure that the cup wall does not buckle.Just before the start of the last phase of excavation is necessary to make a trial run pool.For this externally mounted struts and fill the cup with water.This technique allows you to ensure the quality of welding, there are no leaks.

Making space around

pool to pool of polypropylene in the country was not only a place for water treatment, but also a decoration section, you have to take care of his appearance.Standard requirements for the surrounding area:

• water resistance;
• durability;
• purity.

For standard design adjacent to the swimming pool area use different tiles or decking.

Make polypropylene pool independently, using blueprints, it is easy.The work will help the video posted here.

Video of building a pool of polypropylene with their hands