Build Daily

Walls

August 12, 2017 18:05

Soundproof walls with his own hands

Thin walls, which do not protect the house from the noise and din - is quite common.Many people live for years in such conditions, without even knowing that everything can change in just a few days if the soundproofing quality make their own hands.Good sound insulation of the walls will be long and reliably only if the process of its creation to approach responsibly.

Content

  1. What is needed for the work?Step by step instructions
  2. soundproofing walls with his own hands

If you no longer want to tolerate the noise from the neighbors and the street it is possible to make high-quality soundproofing their own hands.In order to implement such ideas you do not need any special skills, and materials; therefore, performing sound insulation walls apartments can each person on their own.

What is needed for the work?

Reliable sound insulation of interior walls is carried out in several stages, the first of which is the purchase of materials.It is the final result will depend on the quality of materials, so their choice should be treated very seriously.So, we need:

  1. Plasterboard;
  2. Profiles - PN-2 50/40 and PS-2 50/50;
  3. Any sound-proof material;
  4. Screws 3,5h25mm;
  5. Sound insulation tape;
  6. dowels;
  7. Screws 4,2h13 with pr / washer;
  8. primer, putty and plaster;
  9. sealant.

To you it was easier to carry out the sound insulation of the walls with his own hands, videos and photos can be viewed in our article.The easiest way of soundproofing - this increase in width of the walls, with the use of special materials.

Step by Step soundproofing walls with his own hands

For clarity, you can see the video below soundproofing walls in the Khrushchev.

  1. Removing the old finish.Carefully dismantle wallpapers, all decorative elements and skirting board on the wall.It is therefore necessary to perform soundproofing early repair of apartments total, rather than the end.This will help you save money and time;
  2. Prepare wall.At this stage, you need to explore the surface of the wall, align it carefully and repaired all the cracks and potholes;
  3. create metal lath.To take this profile PN-2 and fasten it to the floor, along the edges of the wall and the ceiling.It should not be forgotten that under the user's profile must be fixed soundproof tape.Profile of PS-2 mount into the guide at a distance of about 60 cm;
  4. Carefully fill the crate soundproofing material.At the same time we do not forget about safety - the work is done in a special outfit;
  5. sheathes the wall plasterboard.When plating the walls using screws no more than 25 mm;
  6. close up the joints drywall putty.After the joint space will be sealed and dry, you can hang wallpaper on the wall.
instagram viewer