Connecting the LED strip

LED strips are very common and are a flexible strip, which has an adhesive layer.Luminous element - flat bulb-type semiconductor.Glow such feed can practically any color and is used mainly for decoration of interior, exterior spaces, vehicles, but the main purpose - framing the exterior or interior advertising.

have tape many advantages - it is reliable, compact and economical, it is possible to color management, has control.Disadvantages - relatively short-lived, eventually tarnish can not be mended.But we must take into account the appropriate price.Of course, the connection can be carried out color LED strip yourself.This article will be a kind of instruction for connection.

Wiring LED strip

Before you get started, you should understand which devices need to be connected.This is - the tape itself, a controller controlling the color mode, then control that should be suitable for this controller, and power supply;its type can be determined independently, the critical value it does not.Now it will be described the easiest way to connect RGB LED tape with your hands and a diagram.

tape and the controller cable has 4 colored wires, one of which is the power supply;It is either yellow or brown wire.You must connect the wires according to the colors: blue with blue, green with green and red with red.These colors are reserved and on the tape, and the controller, that is, they will necessarily - be it other simply can not.The last thing you need to connect the power cord - color it may or may vary and overlap.

necessary connections are made using heat-shrinkable tube, or you can apply sealant cable passes.After that, you need to take care of the diet - that is, to connect the controller to the power supply.It is important to remember that this phase L, N - zero.At this stage it is necessary to determine where the minus and plus where.This can be done by trial, that is to connect the power supply to the mains and connect the wires leading from the color of the controller.

If the tape is of great length, it is necessary to pay attention to its total capacity, if it is in the region of 60 W or more, you will probably need a more powerful power supply.Otherwise, the tape will glow dimly and unevenly, will not match the luminous flux, the value of which is specified in the table on the packaging.In order to produce a reliable connection of wires will need the following auxiliary materials: reusable terminals, shrinking.The connection wires should be done with the help of a soldering iron.

purchasing this type of tape, should pay attention that they are divided into two main classes: Normal and Elite.A second group applies for an increase in brightness of 30%.Home is adding unnecessarily.Summarize possible so that work on the installation of the lighting equipment must be done according to the instructions to connect LED strips;very good to become familiar with the video offered on our website.In this case, you will make the connection easily and correctly.

Video connection LED strip

For clarity, we offer you to watch video lesson connect LED strip with your hands.