Bridge to give their own hands

Many owners of suburban real estate equip within its local area are different types of water bodies to improve the climate and the creation of exquisite landscape site design.Possibility to arrange a variety of artificial islands, straits or streams calls for making decorative bridges, which can be made with your own hands.

Step by Step

guided step by step instructions with accompanying photos, quickly and easily you can make bridgesto give their own hands.

1. Before the beginning of the construction of the garden bridge, you must measure the distance through which it is planned to transfer.To this must be added the size of allowances, amounting to at least half a meter on each side of the existing water barrier.

2. To manufacture the wooden bridge, you can use different kinds of wood.For example, one can take pine as the most in an easy treatment.In principle, the choice of wood depends on the wishes of the owners and their financial capabilities.

3. bridge construction consists of a frame made of two glued bars with a minimum height of 32 mm, a width of 20 mm, corresponding to the estimated length (paragraph 1).Also, the required floor edging boards of 20 mm thickness and 100 mm width.The width of the floorboards is not constant and can vary in a large and a smaller side.

4. With the help of stakes driven into the ground, to make the necessary curvature of the future frame.Between them is inserted the twin bars, compressed together using clamps.In addition, the connection bars impregnated with joiner's glue and fastened with screws.For the convenience of working with wood, it can be pre-soaked in water, then the bars will be more flexible.

5. The bent frame to secure left bend at least for a day.After that the design of the survey.If necessary, eliminated timber defects: zashlakovyvayutsya cracks and chipped neatly seams are sealed coupling bars.

6. For deck and transverse frame members are cut planks to length.Thus, edges and ends of the processed boards 45 degrees.

7. The finished bridge design the desired shape is obtained through the combination of the transverse frame members with longitudinal bars.

8. To install the bridge on the space provided in the transverse structures are performed openings.Having passed through their metal crutches minimum length of 50 cm, the bridge is attached to the ground on either side of the stream.

9. On the frame with small intervals are fixed running floorboard.To fix the boards need to use stainless or galvanized screws to prevent corrosion.

10. To protect against rot and outdoor rain, wood impregnated with special compounds and coated with varnish for outdoor use.The bridge can also be painted with waterproof enamels in any color on request of the owner.

Materials and tools

Run a bridge for cottage or a country house with their hands will not be the slightest problem, but you must have a minimum set of tools: screwdriver or drill, hacksaw on wood, hammer, carpenter's square, tape measure and a set of brushes,spatula, clamps.Of materials other than wood, need a carpenter's glue, screws, impregnation of wood, varnish or enamel for exterior use.

If necessary, you can build a cottage bridge capable of carrying relatively large loads, using as a base frame, a larger cross-section bars.Using the recommendations in this article, with photos attached, each owner will easily solve such problems.The result will come out beautiful and reliable bridge that not only decorate suburban area, but also serve as a source of pride for the guests.

manufacturing Video bridge to give their own hands