Build Daily

Home Construction

August 12, 2017 18:05

Garage with his own hands

click fraud protection

Raise garage quite a force to each person does not necessarily have to do construction education.To get started you want to create the future structure of the drawings with reference to the area, to determine from which building materials building itself will be performed.

Content

  1. Arrangement basement garage
  2. Fill a monolithic concrete slab
  3. Walling garage of foam blocks
  4. Construction of monolithic reinforced concrete belt
  5. device garage roof
  6. Installation of doors, windows and doors
  7. Construction parapetand roof waterproofing
  8. foaming openings
  9. Rough plaster
  10. finishing and complex final works
  11. video building a garage with his hands

The site can be accessed with the recommendations how to make their own garage at the cottage, and photos and videossequence of stages of work available will explain all the nuances.

Structurally, the proposed option for the garage consists of:

  1. foundation of hollow concrete blocks filled with concrete and reinforcement;
  2. solid reinforced concrete monolithic slabs;
  3. walls of the foam blocks;
  4. monolithic reinforced concrete belt over the walls;
  5. malouklonnoy roof with wooden frame and surfaced with roofing material as a coating.

Arrangement basement garage

At the beginning of construction on the existing summer cottage is necessary to divide the contour of the future buildings.

can perform this procedure, both independently and with the help of surveyor services.Then you need to dig a trench for the foundation, which can be done manually or rent a small excavator.

bottom of the trench and the wall is necessary to lay a film to perform the waterproofing and to keep the soil from collapsing.

After that laid the foundation of the wall of the small hollow concrete blocks with rebar and concrete filling voids fines of crushed stone with a seal.

Sinus outside and compacted in layers inside the foundation walls using pneumobeetles.

Fill a monolithic concrete slab

Paul in the interior of the garage is filled with a layer of gravel thickness of 10-15 cm, followed by sealing.

On gravel laid a solid carpet of durable plastic film.Along the perimeter set wooden formwork 40-50 cm tall and raskreplyaetsya using spacers and wedges.

Future slab reinforced with two grids with 200x200 mm pitch rods.The height of the plate is not less than 200 mm, the diameter of the armature 10 to 12 mm.

distance between the wires is ensured by space frame.Under the bottom grid is laid plastic stands to provide a protective layer of 20-25 mm.

poured concrete slab to seal vibrators and then smoothing the top layer.

If necessary, enter the device in the premises of various networks of the garage, before placing concrete laid various inserts in the form of pipes and liners.Stove also plays the role of sex in the garage.

Walling garage of foam blocks

If you decide to build a garage of foam blocks with their hands, then a few days later, when the concrete strength of the pick up, you can begin the erection of walls.

first laid waterproofing from two layers of roofing material over the width of the wall is 100 mm in the place of the future construction of the walls.

Exterior walls are made of concrete blocks, stacked on a special adhesive, with ligation of sutures and controlled by a vertical wall with a plumb and level.

According to the developed project are left openings for windows, doors, garage doors, as well as holes for the installation of ventilation grilles.

Construction of monolithic reinforced concrete belt

top row of masonry made of hollow concrete blocks with reinforcement and pouring of concrete for reinforced concrete belts.The belt attachment is required for the roof elements and provide rigidity structure.

device roof garage

malouklonnoy device for the roof, exposed wooden beams with a pitch of 0.5 m with roofing material lining the walls for insulation material.The slope of the roof is provided by pads of different thickness under the beams of wood: from the highest to the front of the garage, with a gradual reduction of their height to the far wall.

The space between the beams on the wall is laid concrete blocks.

performed on beams solid decking boards with a slope of 5% towards the rear of the garage.Over boards stacked Interleaving steam of roofing material without spreading.

Installation of doors, windows and doors

Inside the garage, as in the photo, mounted gate system, folding up.

Such work is necessary to instruct the experts because except for the installation you want to set-up and connection of the remote opening system.

simultaneously inserted plastic windows, according to the left of the opening.

Thereafter mounted metal entrance doors with lock.

Construction parapet and roof waterproofing

On the roof of the long sides and the front of the foam blocks is laid out from the parapet height of 20-30 cm.

on the roof coating is made of weldable roofingin two layers, across the slope with a stop on the parapet structures.

foaming openings

Running foaming windows, doors and gate structures.The slots are filled on 2/3 foam, after which pour the excess cut off with a knife.

Rough plaster

protection of structures of doors and windows film, performed by external plastering walls primed surface with a thin layer of cement plaster, which requires strengthening the garage corners perforated corners.

finishing and complex final works

Over rough plaster coating is applied to finishing.This can be a structural plaster and painting.

necessary more to finish, if desired, the inside of the garage, install the necessary wiring, appliances and racks for tools, perform a driveway.Construction of the garage with their own hands can be regarded as completed, and now the building is ready for use.

Video building a garage with his hands

Garage with pit:

Skeleton Garage:

instagram viewer