Masonry grid for brick : instructions for use

Nowadays range of construction materials allows you to create a wide variety of building and interior elements.At the same time we should not forget about the safety of building structures, as it is the main parameter that applies to most structures.To improve the reliability and durability of buildings is often used masonry grid.This is a relatively recent acquisition significantly increases the service life of the construction of buildings.Also, a metal mesh is useful in cases where the brick is not the highest quality.

For years, metal mesh is used to create concrete fences.It is because of metal material such facilities do not crack and fall apart when small injuries.The principle of the use of metal mesh in the construction of a brick house about the same.Poor bricks within a few years will start to crumble.To avoid this, people covered the surface of the walls or cement lining.Obviously, this is a serious financial expenditure, and after a while low-quality building material will again be felt.

Manufacture of metal mesh for brick

Interestingly, the masonry brick made mesh for small enterprises, which have at their disposal a small machine.This equipment is used exclusively for resistance welding of metal elements.In the production of a small diameter wire used - 3.5 mm.Also found mild wire mesh, the diameter of which is not more than 6 mm.

metal mesh Production costs for bricks is relatively low.The big-budget construction projects this product is used almost always.

When you buy should pay attention to what is best to opt for a reinforced mesh, which is not much more expensive than usual.At the same time, the reinforced materials are not afraid of high loads, which may occur during the operation of the home.

Application of wire mesh for brick

Despite the fact that the metal grid is most often used during the brick masonry, the material can also be use in other cases.Within the housing metal product used for laying tile floor or wall.After these events tile will firmly hold on for many years, even if the grout was not the best quality.

for buildings metal mesh used to reinforce the foundation.In addition, this product is ideal for the reinforcement of concrete.

From this we can conclude that the metal mesh is used everywhere where concrete is used, a mixture of cement or other building material that needs to be strengthened.In most cases we are talking about the use of mesh in the construction of large buildings and other massive structures.

can also find reinforcement mesh.The major diameter of the metal base allows the use of this product during the construction of apartment buildings and other structures, which need to ensure high reliability.In some cases, especially in the construction of foundations, apply several layers of reinforcing fabric.The resulting structure retains its initial properties for many decades.

Use metal mesh for brick

During bricklaying metal mesh can be used in a variety of cases.Most often this material is placed between the layers of brickwork.To the structure is characterized by high strength, a layer of cement mortar should completely hide the grid.The material itself should be used so that the metal wire is not sticking out of the frozen layer solution.Later, it may lead to the formation of cracks, and then there is no construction work can not help return the desired strength erected wall.

In addition, you must ensure that the net may be even.Any curvature over time can cause deformation of the masonry layer.If after buying the grid was a bit of a curve, you can use a hammer or pliers to align the problem areas of production.

The thinner the metal mesh, so it is more susceptible to corrosion.Obviously, it is better to buy products that are already covered with a layer of anti-corrosion.For the price it is not very different from the conventional grid.If this material is simply not commercially available, apply a corrosion protection layer may be on the usual grid.Today in DIY stores there are many anti-corrosive mixtures.Put them on the grid can be with a brush.In this process, you need to exercise the utmost care, as a place in which there will be no protective coating, may soon rust.

When using the grid is important to pay attention to the size of cells.The most popular today are the following dimensions: 50x50, 100x100, 150x150, and 200x200 mm.Obviously, the material with the small-cell provides the highest strength construction erected.A grid with large cells are best used in those cases when the housing walls are thicker.Also, large-sized mesh used to build concrete surfaces and foundations.

When buying masonry grid is important to read the manufacturer's documentation.Quality Net, as a minimum, must comply with GOST 23279 85 or more modern standards.Only in this case, the confidence that the building structure will last for many years.Sometimes a part of the protective coating mesh manufacturers can add completely new compounds that the best way affect the durability of the structure.Before such purchases are best read reviews about the manufacturer.