Installation of blinds for plastic windows

Mounting roller blinds can be made without the involvement of the master.Initially, the executor need to assemble the kit, prepare mounts for fixing the main pipes.Fixed bracket, you can use screws, adhesive tape and PVC brackets.Install blinds for plastic windows with their hands on instruction each householder can.

Preparing to install blinds for plastic windows

work begins with the collection of the purchased kit.The tube, which is attached to the curtain, on the one hand it is necessary to install the plug.

On the opposite side of the fixed control device (block with a chain).

prepared roll must be applied to the installation: you need to put the exact mark for subsequent drilling and correct mounting brackets.The surest solution is to use an additional level.It will help to make preparations without errors, eliminate the uneven attachment of curtains.

Simplify the task of installation will use double-sided adhesive tape.It will help to qualitatively fix brackets.

The advantage of this method is the speed of the lack of requirements for skills in the construction of the part of the performer.Applying a thick tape and special plastic hooks can be minimized job: the owner is required to tie softwood only one bracket (near the chain mechanism), or and not to use self-tapping screws.Step by step instructions

After the preparation for installation should begin to assemble the remaining elements of the kit.The connection parts can be carried out according to the standard manual included in the kit.Additionally, it is recommended to study the attached video demonstrates the stages of work.It will help to understand the layout and the rules of such instruction:

1. The retainer (bracket) is installed in the bracket.

2. A lower opening arm stretched fishing line (which is responsible for raising and lowering of blinds), on the edge of the knot is tied.

3. The free end of the fishing line threaded through the ring on the guide extends into the lower retainer.

4. By the bracket is attached with adhesive tape.

5. Place the installation brackets are determined according to the length of the blind with plug and chain mechanism.

6. With tape outer layer is removed, after which the brackets are fixed on the window.

7. Put the two ear plugs in the holes of the weighting agent roll curtains.

8. Fix the bracket to the side of the control mechanism of the curtain screws.Insert the second bracket on the other hand, fasten it.

9. At the bar weight material curtains are mounted magnets (from the window).

This algorithm will help to learn how to hang the blinds on the window, minimally disrupting the integrity of a plastic or wooden frames.But the artist has to remember that in this fixture will close completely alone with little effort.PVC brackets make it easy to use it in a ventilation mode, or keep completely open.But additional element slightly complicates the process of closing.

Useful tips

When using adhesive tape homeowner must first clean the window surface from dust, oil entities.Scotch correctly pasted only to the purified frame.

For precautions must be attached to special circuit holder window.He will not allow a small child to reach any loose threads.

Additionally, it is recommended to view the accompanying photo, allowing learn more about the ongoing procedure.Considering the above tips, will not be difficult to do the job without any mistakes.Full installation takes about 2 hours.Therefore, each phase of the work can be done without haste, observing the given requirements and assembly conditions.

Video Installation of roller blinds on windows