How to self-assemble roof gutter system?

What roof drainage systems easier?

During the installation of metal gutters readily taken by those who already have considerable experience with this material.If you do not belong to the group of these artists, it is better to choose for your farmhouse roof gutters easier.For instance, require little or no skill plastic rainwater draining system which are relatively easy to mount only via instructions.Here is a designer we take into service for the first time, simultaneously comparing one or another stage of work with a similar installation in the steel sinks.

So, before you complete set, which must include the gutter, connecting and expansion elements of the funnel (among which at least two must also be a function of the extender) and pipe bends.Fasteners are selected to your taste, but the plastic roof drainage systems are typically mounted using the plastic holders.Nothing forgotten?So, it's time to get to work.

Install gutters roof with his hands

If you have wind board, the task is extremely simple.To begin to decide which place we will drain from the roof and it was there to fix the funnel on the two screws, for which there are holes.Indented 2 centimeters on each side fasten the brackets, the following shall be established in steps 60 cm, and so on around the perimeter of the house.

If the wind is not the board, metal brackets are used for mounting on rafters, and the usual funnel replaces the expansion or invoice.

continue to collect rainwater systems with their own hands, and now we have to turn the chute.If we should ordinary funnel, the ends of the two superimposed trays it should be heated slightly and the bottom edge of each drip do.Now put in the gutter brackets, we put some glue on the strips connecting element transversely applied the next segment of the tray to the already installed end to end, and connect them prepared element from below densely pressing until it clicks.

The expanders have special slots for trays, brackets are installed on both sides of the connection points, no more than 2 centimeters .Angular connections and plugs are joined overlap, the edges are coated with glue and tightly pressed to the trenches until it clicks locks.The resulting joints at the connection point and are coated with adhesive, in order to avoid depressurization as running water in the corners and in tight corners it hits the wall with considerable force.For the same reason, to strengthen our home-made drain, on either side of the corner and around the plugs to the brackets glued locks.

Ensure the drain gutter system for the roof

Given the fact that we have already installed a funnel flow that could flow around the perimeter of the roof, it will fall down with powerful jets, if you do not install the drain pipe.Production of drainage system begins to adhere to the hopper knee directed towards the wall.He is joined without the glue line segment of sufficient length to have impaled on his second leg, oriented downwards, it was at a slight distance from the wall of the house.

further manufacture gutter with his hands continued as no glue is sufficient fixing pipe couplings and hose clamps (installation to the wall is done with screws or dowels).

more durable connection is required only for tees and tips with the outlets.Recent come in several types: in the form of the knee, with a tap for barrels, with smooth-bending the lower part and the hole in the side.Often, instead of the tip is placed in transition element for a point sump or reservoir.The second option requires a corresponding tip to an adapter.Crowned drain systems Roof bars of debris and lock ring on the top of his collar.