Soft tile - laying technology and features

soft tile - properties and characteristics

Thanks to its reliability, efficiency and durability, it is considered almost ideal material for the most complex types of pitched roof.Soft tiles, color performance which is quite varied, will look great on the roofs of town houses and public buildings.It is produced in various forms: in the form of rectangles, hexagonal cells, ovals, triangles, flakes, and so forth.

Best soft tile has a number of advantages.The very first thing - is a reliable waterproofing.With proper installation, it is absolutely not miss and do not absorb moisture.It easily withstands high and low temperatures, not glowing in the sun or in the cold cod.Reserve mechanical strength allows the soft roof to withstand falling objects, and a barrage of punches.

With regard to performance properties, the roof of the soft tile will not burn in the sun and keep its original color for a long time.On this roof will never moss, lichen or fungus, due to its resistance to biological influences.You do not need to disassemble the entire roof is damaged some of its sections, it is sufficient to replace only the defective item.

Installation of roof soft tile characterized by its efficiency.It is light in weight, thus saving on the truss system.When laying the shingles is not more than 10% of waste.

Preparation of materials and roof mounting

Before embarking roofing works, it is necessary to calculate the soft tiles.If you want to calculate the number of tiles yourself, then you need to know its size and the size of the roof.The area is divided into the roof area of ​​a sheet of a soft roof and add 10-15%.It is necessary to take into account the skates, valleys, eaves.

soft tile installation, instructions for which will be described further, as follows.The first thing you need to pay very close attention to the base, so it was smooth and steady.To fit the base Edged board, water-resistant plywood or OSB boards.The surface should be thoroughly cleaned and dried.

Technology laying soft tile

Installation of roof soft tile is carried out in three phases: the installation of curtain series and the first sheet, assembling the remaining rows, securing ridge sheets.It is worth noting that prior to installation should be carried out carefully waterproofing roofs, placing carpet the valley around the ridge.The most complex is considered to be the main setting of the bottom row.

begin installation of soft tile need from the eaves.At first sight the protective film is removed, and then it is glued along the eaves.For the convenience of sticking, use roofing mastic.The sheet is placed slightly above the cornice of inflection.

next sheet is glued back to back to the previous one, and each of them is attached by nails.It should be installed the entire series of Cornice.Subsequent sheets should be laid from the center of the roof slope.Speakers edge of the tiles should be cut and fluff paste.

After installing the last row, you can start laying the ridge sheet.Cornice If you divide a sheet into three equal parts, it would ridge tiles. Separate sheet should be pasted so that the short side was parallel to the ridge and nailed to each side.Nails are closed following a sheet-reaching overlap.If done correctly, the soft roof tiles will give you a long and impeccable service.