Build Daily

Repair Video

August 12, 2017 18:08

Installation of the ceiling plasterboard video, false ceiling of gypsum plasterboard

Installation of the ceiling plasterboard photo , a suspended / false ceiling of gypsum plasterboard .How to make plasterboard .Beautiful ceiling circle

Installation of suspended, ceiling suspended single layer of gypsum plasterboard with a video example.

These ceilings have such advantages as: perfectly smooth surface, ease of installation of wiring, a variety of forms.

Even before the acquisition of materials, consider the following nuances: drywall sheet weighs 27 kg - 30 kg, so you will need a telescopic lifter or someone to help with the installation.Further, the quality of local materials is often not up to par and had to use their foreign counterparts.For the ceiling in the bathroom using a water-resistant gypsum board in the kitchen - refractory.

Consider a single-level installation of the ceiling drywall as a base.Please carry the marks on the ceiling and walls of a frame and suspension.On all the walls, departing from the ceiling 10 cm - 15 cm, with the level marks the spot for the installation profile for the starting frame.Using dowels at a distance of 50 cm between them, install rails of galvanized profile.Getting markup ceiling under suspension and therefore bearing guides.Layout runs parallel at a distance equal to half the sheet of drywall (1250 cm).

at anchor dowel fasten hangers every two feet.Now we take the supporting rails and set them in the starting frame, but not tight (gap on each side 2 mm).This is necessary to compensate possible deformation.The guide should be placed under suspension.LN-16 self-tapping screws fasten the rails to the frame.Then fasten the rails to the suspensions with the same screws on each side - two.

Instruments
Widget from SocialMart

Now you need to install rails.However, if the floor area is small, it is possible to do without them.They are mounted with a pitch of about 50 cm - 60 cm, making sure that the fixing points do not coincide with those of the suspensions.There are two basic ways of fastening the longitudinal rails to a transverse.One - by a single-level connectors "crab", the second - in screws bolted to the guide segments of the starting profile.Bearing frame for mounting gypsum board is ready.

Do not forget about the wiring.It needs to be put to the assembly gypsum plasterboard sheets in the special cable - channels.Also hidden wiring must not lie inside a metal profile, in order to avoid short circuits.

frame sheathe sheets, this installation of the ceiling plasterboard will be finished.Fasten the sheets with screws, starting from the wall.Between the sheets should be a distance of 2 mm;the same distance must be between the wall and the sheets of plasterboard.After laying the last sheet plastered joints of special mixes for grouting.It only remains to putty ceiling.See detailed video instructions, there laid everything on the shelves.For reference: the suspension, hinged, multi-level ceiling - it's all about this type of ceiling.

Installing ceiling plasterboard video

Art Decor company will demonstrate in detail how they are doing this kind of work.All the detail and clearly explained with examples.

https: //

Useful tips and guide surface mounting, suspended ceiling single layer of gypsum plasterboard from the transfer Super system.

https: //