Methods to remove the old plaster from the walls and ceiling

Not so bad repair as preparation for it - the phrase everyone knows who at least once in his life faced with the repair work on the premises.Indeed, it is preparation for the full-scale repair takes the most time and effort.One of the most unpleasant and dusty preparatory steps is the removal of putty.Today we tell about the most simple and common method of how to remove the old plaster from the walls, as well as what tools are needed for this work.

Should I remove old putty?

Before you proceed directly to the very dismantling, make sure that the old layer really needs it.It is not always required to complete dismantling.Perhaps you will manage a local change of the problem areas.If the old surface is crumbling before our eyes at the slightest touch, not to mention the rapping hammer, the local work is not enough.In this case, you need to resort to a more large-scale operation to remove old paint from a wall.

Instructions for removing putty

Tools for removing

Before removing plaster from the wall, make sure that you have the necessary tools for this.You need to prepare:

• spatula;
• chisel;
• Hammer.

If this set does not work, how to remove the old layer, you may need a heavier electrical:

• punch;
• vibromashinka
• Bulgarian.

to punch also need special nozzles in the form of blades or spikes.When working with grinder use special diamond blades.

process of removing putty from the walls

Before addressing the issue of how to remove the old plaster from the wall, it is necessary to prepare for work.We have already noted that this stage of the repair features a large number of dirt and dust.Therefore, if the room has any household appliances, furniture, etc.- All this is necessary to bear floor lay a polyethylene or other consumables.To dust from entering the adjacent rooms, all slots need to hide a damp cloth.

Widget from SocialMart

If using easy tools, putty knife or scraper, a layer can not be dismantling, it is necessary to treat the surface with a special solution.Preparing it is very easy.On 1 liter of water need to add 2 tbspStarches.Then, the contents mixed and applied to the old putty using a spray bottle.If such is not available, you can use a roller or brush, but it will take more time.After 15-20 minutes the wall will become loose.Now it is necessary to process a spatula.If the foundation is weak, you will find useful article on how to remove the plaster from the wall.

When to use heavy machinery to remove the old layer?

If The above method does not help, it means that the old layer of putty is very thick, and then you will need to pick up a hammer.When working with this tool is exposed bump stop mode, and the nozzle is taken as the previously mentioned peak or shoulder blade.Puncher will need to walk across the wall, shattering the surface sector.You can perform the work in stages, forcing down sector by sector and gradually stripping the broken area.

Professional teams, conducting such work, using grinders with special diamond blades.the dismantling process in this case is greatly accelerated.But such a method exists, and its drawback - when processing grinder, a layer of putty grinds slowly, rather than layers.Accordingly, the grinding process is accompanied by a huge amount of dust.use a vacuum cleaner, so it is necessary to wear a dust mask and goggles for safety when using this equipment.

Removing the old layer from the ceiling

How to remove plaster from the ceiling?- A question that also has a lot of popularity during the repair.In fact, the solution to the problem is much more complicated.It is unlikely you will cope hammer or grinder - it's very difficult to keep such a heavy equipment in an upright position.If you are having this problem, it is best to resort to a method of wetting.And in order to maximize its ease of operation, use spray or a standard vacuum cleaner by inserting it in reverse thrust mode.