Interior plaster walls - Getting decoration

Interior plaster walls, indispensable conditions for work

Despite the fact that we are concerned with finishing work inside the premises, where you can afford to forget about the latest weather reports, should take into account the time that not always all in these roomsconditions, including heating.So, the season for application to plaster the walls still have to choose the most appropriate temperature indicators.The fact that the inner wall plaster can only be carried out if their surface temperature below 5 degrees Celsius .Non-compliance with this rule will result in the adhesion (adhesion to the substrate) of the mixture is extremely low with all the ensuing consequences.

Plaster is the most expensive decorative materials, but some of the "craftsmen" are trying to save even on it.And now the dried layer of plaster, which was not reported to the lime, is slowly but surely crumble, and the touch of the hands of this process is accelerated, leaving distinct traces on the fingers.And all because of the small amount of the binder composition of the component is obtained by "skinny."Therefore take only proven brand in stores, trustworthy.After finishing the walls of poor quality plaster will take you as much time as you work with the best mixture, namely, to an average of 1/5 of the labor costs for repairs.Generally plastering considered the most time-consuming process.

Decorative plaster for interior works as the best way to finish

Generally all brands of decorative plaster called such only by analogy, in general, a multi-component paste having excellent adhesion to all surfaces .Of course, it is not glue, but its viscosity is almost not inferior to him.However, this consistency does not depend on the amount of binder, so do not think that the addition of large amounts of gypsum or lime you turn a simple plaster decorative to the rank.On the contrary, when such an excess of binding components of the composition will be too "bold" and starts to crack with time, and then, after being hit in the micro-cracks of moisture, and to break down.

Decorative plaster for interior gets all of its characteristics only by special components, namely, the content of minerals in it, silicone, silicate or acrylic.Polymers, such as acrylic, plaster mixtures give a truly unique property.It is those mixtures which include those polymers that are best suited, for example, the ceiling trim.To apply the polymer and the internal warm plaster, which contains polystyrene pellets.Mineral plasters are also only a small percentage of the mineral grains, the main component of the binder - white cement.

Internal plaster the house - a very important task

no secret that the plaster is applied only on the perfectly well-cleaned the wall, so try to prepare the surface beforehand, shortly before the start of work.If the substrate is very absorbent, it must be primed with a special compound to improve adhesion, this will help ordinary paint brush or roller.Then you can proceed to the preparation of the solution of the dry mixture, of course, if you have not purchased the finished decorative plaster for interior decoration.Factory mixture is diluted with water to the desired consistency is not very liquid batter to preserve the composition viscosity.

The main point is the thorough mixing of the solution, then no water or dry mixture into the solution can no longer be added.

on the walls and ceiling plaster should begin to apply immediately and, if possible, to spend the amount of cooked for half an hour.Of course, there are mixtures, which harden very long, but they are beginning to fasten after forty minutes.On the decorative ceiling, including the Venetian plaster is applied falcon toward you, and on the wall of the mixture can be applied with a trowel or plaster falcon, as someone comfortable, but the movement from the bottom up.Leveling is performed zigzag movements.By following these simple rules, internal plaster the house will be made by you without any complications.