How to stick the tile in the bathroom - rules and tips

Tile has long gained much popularity among consumers.Manufacturers have tried to consider all citizens' preferences - you can pick up a tile at any price, and in the desired size, thickness, color.It is convenient because it can be used for decoration of the walls and floor of the home, it can be used with any temperature environments.One of the advantages of tile tile - its environmental friendliness.

How to glue tile

Please choose the correct tile.One of the criteria for selection of tiles - the calculation of its required amount.It should be understood that the premises are not perfect geometric shape, so after the measurement parameters the surface on which tiles will be laid, it is necessary to define some stock material.

Before you proceed directly to the gluing of tiles, it is necessary to prepare the surface pasting.It must necessarily be clean, dry and smooth.Irregularities in wall or floor lead to the fact that the tiles will not lie down right beautiful.It is recommended to make the pasted surface notches (ax or chisel).The incisions should be made not deep, but frequent.They provide a strong coupling of tiles with the surface due to the adhesive mass.Adhesive solution will "cling" for these incisions, and tiles will be glued tightly.

Before applying the solution to the surface it should be abundantly moisten with water - this will prevent the absorption of moisture from the surface of the adhesive solution.Otherwise, the quality of gluing is lower.

Gluing tile is best from the bottom up.It is advisable to start work on the room angle, calculating that it ended in the most not view the site.The fact that the length of a pasted over surface never lie integer number of tiles - will certainly want to add near the opposite wall tile pieces.It does not look in the best way.Okay, so that later on the place where the installation is over, there was some kind of furniture or something else.If not, then pasting a better lead in the direction of the far wall.If you intend to paste tiled walls and floor, it should start from the walls, and then glued to the floor.

Technique tile stickers

first tile is applied to the wall - it should lie tightly enough.This is achieved by slight pressing of it to the surface.Then he should straighten tile using or mallet, or a conventional metal, wrapped in something soft, so as not to split the tile.When laying the tiles need to constantly monitor its "horizontal" and "vertical".

used for this construction levels, plumb lines.The simplest plummet: a string with a small weight (nut, bolt, etc...).After laying the entire surface using a trowel seams sealed with a mixture of masonry.

should be taken into account that the adhesive has its temperature characteristics.Therefore, we must understand that the room temperature depends on the "setting" of glue.You should not immediately begin to expose the tile some mechanical effects - give it a "foothold".