Where better to begin repairs in the bathroom - the steps and tips

Repair - all his life he accompanies every human being.After all, everyone wants to see in his home was possible more comfortable, cleaner, so that it can provide all the comforts of living and the ability to fully relax.But some areas of the house identified for specific relationships, and one of them is the bathroom.Today we will talk about where to begin repairs in the bathroom.

Features of repair in the bathroom

• Limited space.
• Increased requirements for sanitation.
• large number of elements of the utilities and sanitary devices.
• excess humidity.

Planning

Unfortunately, not all are paying enough attention to this stage, although this depends largely on the quality and performance of all activities and the timing of their implementation.

Scope of work

repair can be either cosmetic or capital.Let us at last.In this type of work, "refashioned" room completely:

• changing plumbing, often installed additional elements.
• a qualitative processing of all surfaces.
• Produced facing new coatings.

necessary to provide and opportunity to conduct operations.For example, replacing old pipes with new ones, installing another towel warmer.The apartment house is can only be done by disabling the corresponding system (heating, water, hot water).When it's convenient?And it is not the owner of the apartment and its neighbors on the porch.The old building homes the same towel rails mounted in the heating circuit.So, plan a job in the winter problematic.

selection of materials and equipment

Note:

• type materials.They must be water-repellent.
• them compatible with each other.For example, the wall covering and the future.
• stacking method and what is needed (solution, the adhesive composition in quantities)?Clearly, if this is not provided, it will always have to run to the shops instead of repair.

Bathroom - room not only with excess moisture, but also with increased water pumping.Consequently, leakage can not be avoided.At major repairs it is advisable to consider the issue of resettlement quality waterproofing floors to avoid further litigation with neighbors on the floor below.

is desirable to do the same and to the ceiling, especially if the neighbors in the apartment on top of the "problem" category.So you do not regret the money spent and time.

Special conversation - a heated towel rail.Few lay people know that in apartment buildings (in particular it does not apply), it is impossible to replace the old model (the usual "coil" for us) to put that horrible.After all, this device is not only for drying small items and heating bathroom.It is a loop temperature compensation for the entire circuit (DHW or heating).Therefore, before selecting a new model, you need to consult with a specialist.Otherwise, do not avoid the gaps in the field of pipe joints in the riser.

In recent years a proliferation of devices that warn owners about the leak occurred.This point should also be taken into account.When major repairs can be carried out the necessary installation, the "secretive".

necessary to consider the question of what to fix, install and using what?So, we need to prepare the appropriate tool: welding machine, LBM ( "Bulgarian"), punch or electric drill (with the appropriate drills, drills), and the like.And, of course, hardware.All screws, bolts and nuts should be made of materials that can not be corrosion.

Where to put construction debris?

problem, by the way, is not so simple, and in detail, we have considered it in this article.In every village there are regulations, which states that it is possible to throw in the trash cans, and that tenants need to take out their own homes.For violation of sanitary norms in the surrounding area - administrative liability.Of course, representatives of the serving portion of the Company do not carry around the clock duty near the bins, but we can not exclude the possibility of the existence of "vigilant wishers" who can "otsignalit".

Main stages of repair

1. Dismantling of old equipment and surface coating.
2. Preparation of all bases.It should be carefully cleaned and wash all.Check the integrity of the walls, floor and ceiling.Irregularities should be liquidated, all cracks, joints - quality embedded.At the same time, you can replace the pipes, their preparation for the installation of sanitary equipment.Naturally, the need to provide for the installation of stop valves, in order not to disturb the neighbors prolonged shutdown.
3. Processing entire room special means which protect the room from the appearance in it putrefaction.
4. priming.This will provide better adhesion materials.
5. Installation of some elements of engineering communications.This special question.Everyone on the basis of the situation, he decides at what point to put the accounting counter, faucet, towel and so on.There may be a single recommendation no.The main thing is not to damage any equipment or materials.
6. Placement waterproofing layer.

Further work depends on the materials and method of decoration.Some glues, someone mounts a panel crate.

Note

Quite often set in bathrooms, electric devices and point to connect them.This is not recommended, but if so decided, it is necessary to consider that the power should be in special versions (waterproof version).In addition, it is necessary to "drown" in the wall.And be sure - grounding of all these points and devices!