Textured plaster their own hands - quickly and easily

Today, with a large range of building materials and tools, many people try to make repairs in their homes with their own hands.Moreover, that modern technology and the diversity of the raw material this task is much easier.

Textured plaster allows to realize any fantasy about the interior decoration of their houses and apartments.Packaging with plaster consists of three parts:

1. directly plaster (represents a certain homogeneous mass)
2. various additives
3. fillers.

Everything is in the processing of the wall creates a certain relief surface.

surface for plastering, should be carefully handled.It is necessary to remove all traces of wallpaper, existing rust spots.The surface must be carefully aligned.To this end, it should be proshpaklevat, maybe more than once.The next stage - the alignment of the surface (sanding) and soil application.Some plaster allowed to be applied to the primed surface is not, but it is better not to neglect priming.

When applied directly by the plaster on the wall surface of the work should be started from any angle and move uniformly around the perimeter of the wall.Working together it is recommended that one person inflicts plaster on the wall, and the other at this time starts with special rollers to give a certain Allocated layer embossed look.Applied layer should be 3.2 mm thick.Processed wall in parts, between which should not be left straight edges.Otherwise the joint edge will be visible.To apply textured plaster using trowel, which usually comes bundled with the package.

After wrought layer dries out a bit, you need a metal trowel to remove excess plaster - growths and other irregularities.After complete drying of the plaster Allocated (usually a day - two) surface is treated with sandpaper.

In order to ensure greater safety of the plastered wall is recommended to apply it on a protective layer.It is best to use wax, while the walls are easy to clean.