Stucco exterior - what is its scope ?

plaster facade of the house: the dignity

Speaking of this building material and its properties, then just 10-15 years ago, they were quite different.For example, a significantly different composition and classification of facade plasters.Frequently observed swelling, cracking, and, in general, did not differ coating durability.The current composition has completely different properties, especially if you are using an elastic plaster facade.

list some of them:

• has a diverse color palette, so to create a completely different design facades;
• applied both on the facades of buildings and structures, and on fences.Thus it is possible to make not only the finish, but also to generate any decorations;
• features high energy efficiency, thereby significantly decreasing the thickness of the walls, as well as reduced construction costs.Plus part in practical application;
• has excellent performance, it is durable and reliable.The coating protects the surface from all types of weather phenomena.

consumption and scope

Apply this building part of almost any prepared surface.It can be concrete and brick walls, plasterboard, aerated concrete walls and cement blocks, gypsum boards and other grounds. important condition for each surface is a primer.

Plaster is suitable for homes, basements, laundry rooms, garages, industrial premises and other buildings.Flow dry composition is approximately 16,5 kg / m2, but it depends on the type of material and substrate.Each package is specified flow rate and method of mixing.The composition of the facade of plaster is also dependent on the type.

Sometimes plaster for leveling and for decoration.Levelling Compounds are divided into acrylic, silicone, cement and sand.Decorative - on textural, structural, Venetian and other.They are chosen strictly under the base and under the conditions in which the work will be carried out.

For example, silicone compounds are selected if you need a durable and reliable coverage because they are highly resistant to all kinds of weather events and have a long service life.Cement-sand suitable for conditions with frequent temperature changes (mountains).Acrylic surface does not absorb moisture.Decorative

used to generate a particular surface texture, as well as to simulate a particular coating (stone, granite, metal and so on).It can be isolated from the main properties: practicality (easy is sealed in case of damage), durability, moisture resistance.

plaster facade with their hands: technology application

plaster facade walls is carried out on a specific technology.First of all it is important to take care of conditions (line of temperature and humidity).Although the market today there are a mixture that can be applied in all weather conditions, but not so much.Most of the compositions are used only at t + 5 ° C to + 30 ° C.

In the second stage a base is prepared and the dry mixture is diluted in the proportions and according to the recipe, which is written on the packaging.The surface is mandatory should be cleared of any previous coating.Also it should be free of dirt, dust and oily substances.The walls are made of stone or brick cleaned to a depth of 1 cm.

Next facade plaster is applied by spraying .With some effort and sharpness on the basis of the number of snaps the composition you want it on the site.Thus, over and over again cause the entire layer, which further align the rule or trowel.Once the plaster dries, but not yet cured, it is carried out grout.Do this in a circular motion using a trowel.