Brass pipes - a place in the modern construction it takes ?

Pipe brass - what is it?

Brass, as we know from the school course, is (in the simplest case) an alloy of copper and zinc.Alloying of copper on the metal can be accompanied by the presence of aluminum, iron, nickel, lead, tin and other additives.These brass alloys are complicated, unlike a simple copper compounds and zinc.

Production of pipes often carried out by cold deformation (drawing) and pressing.The addition of zinc increases, in comparison with pure copper, the hardness of the resulting alloy.Through U-phase brass zinc above fluidity, strength and ductility.With the growth of its amount in the solution and change these parameters of the final material.

The letter "L" marked with a simple brass.Of these alloys also conducted the production of all types of rolled products.The best indicator of plasticity, as is commonly believed, is characterized by brand L68.Accordingly, L68 brass pipe has the best plasticity, allowing the greatest number of kinks and strains.

brass thin-walled pipe, thick-walled and other

For the production of brass tubes used alloys of various compositions.So, for many specialized products depending on their purpose alloys can be used at different stages of the phase composition, further defining its class: cast or wrought.It is often carried out semi-finished products for further processing.

brass thin-walled tube general purpose compression techniques usually performed or cold deformation (drawn cold rolling).The widespread use of such pipes found in a boiler.And for this use preferably brass L68 is more resistant to corrosion.

With regard to the requirements for transportation of materials in liquid or gas form under the pressure applied thick-walled brass tube .Such a pipe to the properties of the raw material, is able to solve many problems of application features.Typically, the manufacturing method provides the possibility of obtaining high-quality thick-walled seamless tube.

As already mentioned, in comparison with pure copper brass has a higher strength and corrosion resistance.In addition, nearly all of brass (lead-free) easily handled the pressure at different temperatures and well connected by soldering (low temperature) and hard (high-temperature) solder.

Such wonderful features could not be more suited to the conditions in which the pipe is manufactured and used profile brass.Its peculiarity lies in the cross section (square, oval, rectangular, etc.) determined by the need to use the building or other technologies.

Such pipes are also different elasticity, a high density.Construction of the profile pipes have proved their durability and reliability, and, despite the relatively high cost, widely used in construction.

Compression fittings for pipes or brass that is needed for the installation?

for use in different operating conditions may be alloyed brass simple individual metals or metal compounds, usually in small amounts.Thus, the use of aluminum is due to the peculiarities of operating in an aggressive marine environment, etc.

When connecting to the system used for compression fittings brass tubes.Such devices provide a tight, rigid and mechanically stable fixation.Another advantage over the method of soldering connection is the lack of special equipment and temperature effects.

In conclusion, it should be noted that the weight of the brass tube much less others.Even comparing with copper, with all of equal size, this figure is lower by about five to six percent.As a result turns and smaller overall weight of the structure or system.