Wallpapering - the general rules and characteristics of the various techniques

features modern finishes

Wallpapering with your hands, a video guide which is attached to this article, the process is simple and shoulder absolutely anyone, start a repair.There are several basic types of finishing materials: vinyl, paper, non-woven, textile, liquid.Wallpapering methods will vary depending on their type.

It should also be remembered that even the choice of adhesive will depend on the type of finish you choose for your walls.We can not say that it only confuses the consumer, it allows to obtain the desired quality of finish, the type of which you choose, depending on the expected pattern, operating conditions and other things.

Sticking wallpaper various types

Vinyl has high density, and therefore requires the use of a suitable bonding composition.Technique wallpapering vinyl-based involves folding the web into the buttered side after applying the adhesive, so that the material is well soaked.Bands need to prepare in advance, promazyvat need just two or three strips, and then you can proceed to the preparation of the wall.

Rules gluing paper type wallpaper is almost no different from working with vinyl, but contact with the paper should be careful, because they are not as dense and can raskisnut by glue, tear or stretch.Technology gluing wallpaper on non-woven basis requires a special or universal membership.On these strips do not applied previously, only the surface is smeared composition itself.

Textile materials - the choice of people who have exquisite taste.Driving wallpapering cloth requires a more thorough preparation of the wall than the other.Liquid wallpaper are sold in packages in the form of powder.It is diluted in water and applied to the wall with a roller.This material is used for the interior decoration of offices and outbuildings.

How to hang wallpaper - general procedure

Before starting work, should know what it takes to wallpapering.For this need: scissors, roller for applying a liquid composition, a special trowel, bucket of water and a rag to remove excess glue, distributors, plumb bob or laser level.Wallpapering options will differ depending on their type.For example, liquid wallpaper have a completely different application technology.

first step is to align the wall, or poshpatlevav poshtukaturiv and pogruntovat them.It is necessary to immediately shoot from the walls of all the outlets and switches.This is followed to prepare the adhesive, following the instructions, which is located on the box.It is applied on a wallpaper or the wall surface itself.

When applied to the composition at the wallpaper, you should try not to stain their face side.The very fabric made to lay on the table or on the clean floor.There are various examples of wallpapering.In most cases, all start from the sheet by applying the window.is the most thoroughly treat the alignment of the first sheet.

To do this on the wall with a plumb or laser level is required to draw a vertical line through it and attach and fix the first sheet.The web is first applied and smoothed the ceiling, then leveled and exposed on the previously drawn by the line.Wallpaper trowel from beneath the fabric driven out air and excess adhesive from the center toward the edges.Clean cloth should remove those excess, speaking on the edges of the sheet.

subsequent sheet is applied to the previous butt.It is made to work with all types of wallpaper.Holes for sockets and switches should be cut immediately after the end of the work, yet the band is well soaked.After completion of the work in the room can not allow the penetration of drafts, or air gets under the cover, and it is covered with bubbles.

Numerous samples wallpapering presented on the site.As you can see, this is a simple procedure.Video applied to the article, will help to clarify all technical nuances.