Main characteristics and properties of CIP panels

What are the SIP-panel?

SIP word means - structural insulation panel.This building material is a structure made of three layers: two OSB and polystyrene middle layer.With the use of polyurethane adhesive, under pressure of 18 tonnes, these components are interconnected.The panels produce two kinds of wall and floor.

characterize the main components

• Oriented strand board (OSB) - 97% of the material is wood chips, folded in several layers and glued using a variety of resins.The chips all useful properties of wood, but it is no different defects: swirls, change of direction of the fibers.To impart flexibility and strength slab during bonding chips arranged in different directions in the outer layers they are placed longitudinally in the interior - transversely.With this multidirectional orientation, as well as to special treatment that ensures water resistance, resistance to mold occurrence, rotting, stove becomes an ideal building material.
• polystyrene - is located in the middle of CIP panels, 98% air and the remaining 2% - styrene.The foam is environmentally friendly and non-toxic materials, have a long service life, low weight and high thermal insulation characteristics.Due to these properties of the material is the most popular insulation in construction work.

Features SIP panels

this building material is used for the erection of panel-frame houses, country houses, porches or outbuildings.

Basic properties panels:

• size - maximum height - 350 cm, width - from 63 to 150 cm, thickness - 5-23sm, it all depends on the purpose for which the work is intended panel, internal, external oroverlap;
• weight - is lightweight.For example, the panel size 250h125h18 cm weighs 50 kg.The total weight of SIP panels for the construction of the home area of ​​150sq.m.It will be 15 tons.The mass of bricks that will be needed to build a house of the same area - 60 tons.Due to its light weight plates, you can save considerably in the construction of the foundation and for the carriage of material acquired;
• increased resistance to load - the material has a three-layer structure, so it can withstand a longitudinal load well (10 tons 1kv.m.) and transverse (2 tons 1kv.m.).For vertical bending one of the plates is compressed and the other expands during this time that the design provides a high resistance to bending.These characteristics allow the construction of a well to withstand strong gusts of wind, snow and showers.Maximum load, which can withstand the floor - 150 kg 1kv.m;
• high thermal insulation properties - this causes the low thermal conductivity and a three-layer structure of the panel.CIP panel with a thickness of 12 cm has the same properties as that of brick masonry with a thickness of 2 m or reinforced with 4 meters thick;
• high resistance to fire - plates treated with a special substance - fire retardant, which leads to self-extinguishing fire on the surface.Fire material 7 times higher, in which the wood.

It can be concluded that the SIP panels are ideal as a building material for prefabricated houses.

Positive properties panels

There are certain qualities of this material, which cause their effectiveness and relevance in comparison with other building materials:

• increased heat retention structure in 1,5-2 times;
• rapid installation - the house "turnkey" will be ready within 3 months from the start of construction work;
• strengthening and giving strength of the building structure;
• SIP panels are not subject to deformation during operation;
• can build a lightweight frame, assome load will take the panel itself;
• eco-material - the panel is 97% of the wood chips and impregnation, waxes, fillers and polystyrene are completely harmless to health;
• flat panels, thanks to this you are ready to finish the room, allowing significant savings in time and money, becauseYou will not need to perform putty;
• SIP panels do not require insulation;
• small thickness of the plate makes it possible to almost 30% increase in the useful floor area.

We see that the construction of the house with the use of SIP technology meets all the specifications for thermal protection, durability and reliability.

cost SIP panels

order that the final product was really high quality, you need to find the good stuff, and correctly perform all the processes.SIP panel is expensive executed by all standards.

Of course, you can save and buy panels made by hand in private workshops.But as a result can be purchased poorly glued surface unevenly applied adhesive coating and a layer of polystyrene nizkosortovogo, for example, the DPM-15.

As a result, the structure will be built with violations, reducing all the characteristics of the material used, and eventually may even be dangerous for the residents of this "economical" and "artisanal" home.

Therefore it is better not to save and buy a guaranteed high quality SIP panels from plant products to be safe, warm and modern home.

On this Site http://technosip.ru/