How to repair their own chandeliers

Repair chandelier with halogen lamps with your hands

signs of breakage lamp with halogen lamps are:

1. does not shine all the lights.
2. Off of the lights.
3. If you touch the lamp, it is for a while begins to glow.
4. light only LEDs or light bulbs only.

reason for the need to repair the lighting apparatus are generally poor contacts on the connections.

1. In this case, to carry out repairs halogen chandelier, sweep spend enough contacts and check wiring to terminal boxes.
2. If the contacts are connected correctly, there is no visible damage, to determine the damage must use the tester.The tester measures the output voltage.Servicing is required if the tester indicates zero on the output terminals of the transformer.In this case it is necessary to purchase and install a new transformer of the same model.
3. When repairing lamps with halogen lamps with a remote control, first check the serviceability of batteries.After this check the integrity and operation of lamps and transformer.If all of these elements are correct, it means that the electronic control unit is broken.Replace it easier than repair it.When the electronic unit replacing the need to mark the wire to connecting not to be mistaken.

Repair LED chandeliers with their hands

very many now prefer LED lighting, because they remain much longer in operation.If you can break pretty quickly to repair the LED lamps with their own hands, without resorting to the help of intermediaries.

1. first step is to check whether the voltage supplied to the lamp.This can be done by using a multimeter.If voltage is present, proceed to the next step.
2. Check availability bulbs.
3. Check the fuses.To do this, they need to "ping".If the fuse is broken - change to a new, if not, will have to repair.
4. Now check the insulation and the integrity of the wires in the luminaire housing.The body also needs to ring.
5. At least checked the power unit and the LEDs themselves.The rectifier can be used multimeter is commonly used as a power supply for testing.In case of failure, the power supply will be replaced by the same easier.

Repair crystal chandeliers alone

Crystal chandeliers themselves are quite expensive, and even repair of Chinese products from crystal will not be cheap.To repair a broken item crystal lamp by yourself, you must perform the following steps.

1. Cut the foam piece is shaped like the one that has failed.
2. For a successful connection, place the item in broken form.
3. Before gluing part, take on the form of a distance of 15 cm and loosen the retaining wire.
4. On the connection pieces, apply adhesive.For repair of the Chinese chandeliers better use of silicate glue.Now
5. element together with the form installed on the ceiling, on a par with the rest.Foam shape should firmly hold the item.
6. Give details at least 24 hours to dry and remove the foam form.

Repair lamp yourself, as we see, quite simple and not so expensive.If a serious failure, the repair of the Chinese chandeliers, or any other, it is better left to professionals.In some cases, repair chandeliers in Moscow and St. Petersburg can be costly, this should be ready.