The heat-resistant paint for stoves - how to protect and paint the house ?

What is the material?

resistant mixture have differences in their structure.Their main aim is opposition to high temperatures.In addition, they perfectly protect the surface from the effects of steam, cold and hot water, temperature changes, prevents corrosion of metal parts.

Note!The level of protection and the precise scope of application depend on the composition of the paint and the percentage content of various additives.

correct and effective use of the paint can only be aware of their composition, properties and differences.In general, they are based on a varnish slurry with the addition of special mixtures.As they dry, a film is formed on the surface which protects it.Just like ordinary paint, heat-resistant surface make more aesthetic and bright, not only fulfilling its main function, but also fully meet requirements of aesthetics that apply to the paint materials.

ready to work

Apply heat-resistant paint to protect structures that are exposed to high temperatures up to 600 degrees.They also cherish from aggressive oils, salt solutions, stray currents and oil.Often this type of paint is used as a paint oven, due to its characteristics.

Before applying the paint surface should be cleaned from dust and dirt, degreased and dry.If the coating which was applied earlier, more durable, with destruction of not more than 20%, the partial processing is used.In areas lack coverage and around 15-30 centimeters made cleaning.Before use, the liquid is well mixed and diluted with xylene or a solvent, if necessary.

Apply the mixture can be at any temperature, but the surface must be dry, without moisture or frost.Depending on the temperature, the paint dries from 30 minutes to three hours.Complete drying takes place by heating to a temperature of 150 degrees.

Note!In the case of pneumatic spraying one approach should be 15-17 seconds.Nail

brick furnace must form a coating thickness of 40-80 microns for use at high temperatures.If the first layer is too thin, then another applied in 40 microns thick.

oven painting technology and fireplace

If you make a painting of the stove or fireplace, the paint is applied in 2-3 layers.Each new layer - only after drying the previous one.To obtain a high quality color (without stains and flaws), each layer should be as thin as possible.Joints between brickwork is usually painted in bright colors.If a fireplace or stove are made of poor quality material and masonry negligent, the whole surface of the clay-plastered lime or lime-plaster solution.

preparatory process is as follows:

• produced a thorough cleaning, the old plaster is removed, if necessary;
• Deepen welds by 10 millimeters;
• heat their oven, the temperature was average;
• surface is moistened with water, and is applied in several layers of plaster.

Important!Overall the entire layer of plaster should not exceed 10 millimeters.

• surface leveled and trimmed;
• After drying, he trimmed the solution.

Thereafter fireplace ready to paint.The paint is mixed and applied to the surface.Making Russian furnace can be done in a rustic style and decorate it.Paint for painting is done as follows: in a quart jar is filled with gouache and add one egg protein.All this long and mixed thoroughly.