How to put a tile on a wooden floor

Preparation for laying tiles on a wooden floor

In order to begin work on laying of tiles on a wooden floor, it is necessary to prepare a number of tools and materials:

• tile floor.
• cement solution.
• Nailing.
• screwdriver.
• Mastic to repair or bestilat.

How to put a tile on a wooden floor: video,

Action Plan Work on laying tiles on a wooden floor consists of several turn-based events:

• Prepare floor surface for use.
• works to remove previously applied coatings.
• Checking wooden coating materials for signs of damage.
• laying masking grid.
• Preparation of the solution for the job.
• laying tiles on the floor surface.

intuitive operation demonstrated in a video statement.

How to lay tiles on a wooden floor.

Step 1: Prepare the floor for tiling

To tile has been laid correctly and permanently - the floor surface should be checked for irregularities and loosely attached wooden elements.If you can not bring the surface in proper condition, it is advisable to completely remove all the wooden elements and mount the cement screed.When complete uselessness of a wooden cover, it helps to avoid damage to the tiles in the future.

Step 2: Dismantling of old coatings before laying

Before you begin laying tiles on a wooden surface, you must pre-clear it from the previously applied paint and varnish.These steps can be performed in several ways: mechanically, by heat treatment, and also by means of special fluids.The mechanical method includes the removal of paint by scraping it with a wooden surface with different tools such as a spatula or chisel.Thermal method of removing paint from wood surface involves preheating the old paint using a dryer assembly and then remove it using the same spatula or chisel.Removal via the liquid application means a special solvent that separates from the paint surface, after which it can be removed using various instruments or even cloth.

Step 3: check whether the durable wooden floor enough to lay tile

Before laying the tiles should be checked pre-cleaned surface for various cracks and bulges.Upon detection of such elements to be removed with a chisel (in the case convexities) or fillers (for cracks).

Step 4: reinforcement of the floor tiles to

well rested on the floor, you must first put on the wooden surface of the masking grid.Then the mesh is coated with a special primer, after which it needs to dry thoroughly.

Step 5: prepare the glue for tiles

solution for ceramic tiles on a wooden floor is made by mixing cement with Bustilat construction or mastic.This provides better adhesion of construction materials with the floor surface.

Step 6: How to put a tile wood floors

tile laid on a prepared surface in neat rows, according to a prearranged pattern.

Thus, in the article have been described and characterized the event by installing ceramic tiles on a wooden surface.