Parquet adhesive - can choose the best one ?

Water-dispersion adhesive for wood flooring - environmental friendliness and efficiency

Practice has shown that abroad, where the question of environmental safety and human health are treated with special care, it is widely used water-dispersion adhesives.The fact that they contain water that evaporates during drying composition.Obviously, these evaporation will not cause any harm to health.

assortment of waterborne adhesives is quite large, but they vary according to the percentage of water in the composition.The higher the water content, the lower the price.This is due to several reasons, one of which is the most significant.

Water-dispersion adhesive suitable for laying parquet small.

Parquet - flooring is made of natural wood.This should not forget when choosing an adhesive, in which structure there is water.For some types of wood moisture it is fatal.Thus, the water-dispersed composition with 36% water content is strictly forbidden to use during installation of parquet wood of beech, cherry, pear or apple.Failure to comply with this ban will soon lead to the fact that the coating is deformed.It is worth noting that this type of adhesive is perfect for placing material on the plywood base.

The glued parquet - formulations based on solvents

If you wondered what to glue parquet, one of the answers will be the use of compositions based on solvents.Unlike waterborne formulations based adhesive solvent widely used it is in the post-Soviet countries.He has an unpleasant smell of solvent and fire hazard.The latter property has caused a number of compliance requirements by using this composition.

Firstly, the room where laid parquet, should be well ventilated.Secondly, in the immediate vicinity of the container with the glue is strictly forbidden to smoke or place any sources of ignition.However, solvent-based compositions and have a lot of positive qualities.Thus, they are characterized by a certain degree of fluidity, that allows to eliminate coating defects.

In addition, a glue hardens pretty quickly (it is sufficient to 5 days) and parquet polishing can start even before its full solidification. Experts say that the composition of this type is perfect for those types of wood, which are subject to deformation under the influence of moisture.

two-component adhesive for parquet - modern composition for laying flooring

modern two-component adhesive is one of the most effective tools used for laying the floor covering.This is due to the fact that this composition is universal - it does not contain organic compounds and water.Bonding flooring and the subfloor is due to conventional chemical reaction between the two components - the adhesive composition and curing agent.

is worth noting that in the process of applying and drying the composition releases harmful substances to the body, so you need to take care of remedies.After its complete curing is no harm to human health are not applied.Due to its versatility, this adhesive can be used on any base - plywood, wood, concrete.

two-component polyurethane adhesive for wood flooring has two major components: one is based on a resin, and the other is a hardener - most often it is the isocyanate.

two-component glue suitable for the installation of any flooring, regardless of the size of the timber and planks.It may even be an expensive decorative parquet.The finished coating will be different high strength adhesive joints, it will serve you for a long period of time and keep aesthetic appearance.When applying two-component composition is necessary to exercise some skill, as he grasped after 1-2 hours.Choosing this type of adhesive, you should be prepared for the fact that its price is quite high.