Build Daily

Building

August 12, 2017 18:05

How and what is right to cut drywall - master as interesting

cut drywall Drywall is one of the most popular building materials.It is used not only in the construction industry, but also in everyday life, during the repair work on the premises.It is often necessary to cut the material as plasterboard manufactured in large sheets.When repairing the house or apartment you need to get sheets of different sizes, and often - and different configurations, with cutouts.And here the question arises - how to cut drywall or trim existing sheet. In everyday life, there are few who have the professional tools and accessories.Therefore, we consider the simplest methods of using the simplest of tools that are at each host.




With knife

The easiest and most convenient way.It is necessary to put a sheet on a flat surface and outline the cut line using a conventional pencil and ruler.Then along the line (it is better to use a metal ruler) on the planned line several times with a force holding the edge of a knife.The depth of cut should be done such that the middle layer of the board became visible (gypsum).Then list on the cut line to put on the edge of the surface (table, bench) and fracture.The bottom layer of cardboard is also easy to cut with a knife.The side of the incision can be easily processed (plane, flat file, and so on. D.).

This method is especially useful when cutting the pieces at great length.

drywall cutting rules

With hacksaw

This method is used to cut into the drywall sheet of some parts - a square or rectangle, which is often necessary.For a start we mark up the outline of the cut-out.Then, using a drill in one of the corners of the contour drill hole without breaking the circuit size.Focusing on the web width hacksaw, carefully expand the hole as long as the blade will not be able to "enter".Expand possible with a large drill, round file, or by turning the edges of the hole (with the gradual expansion of diameter) drill available.Thereafter, the sheet was passed through a hacksaw blade, we fix it and cut along the planned lines loop.After cutting as accurately process the ends of the cut pieces.

If there jigsaw, this process is significantly simplified.

If you need to cut a hole round, oval, it is best to use all the same knife.True, have to tinker a lot longer, but in fact for themselves!We must not forget that the drywall - a material soft, brittle, so when you work with him to observe accuracy.

instagram viewer