Contemporary Russians - how to connect the chandelier with his hands for a few minutes .Video instruction

How to connect the chandelier

Very often when you move to a new apartment, or after repairs in the old apartment is required such household operation, as a replacement or installation of chandeliers.Thus, if it is the first time, there are practical difficulties.Not every handyman knows how to connect the chandelier, especially if the lamp has several lamps, or represents a device is equipped with a controller and a remote control.

purpose of this article to help home handyman to cope with connecting chandeliers, without the help of a professional electrician.

What chandelier

chandelier - is a central light fixture in the room.It is usually in the center of the room and a few lamps to ensure even coverage.The number of light sources usually varies from 3 to 6, and chandeliers connection scheme includes combining lamps in groups to achieve different modes of illumination brightness.Understand how to connect the chandelier - is simple, but it is necessary to provide internal electrical connections and know the purpose of the wires that come out of the ceiling opening.

practical connection lamp

Before you start you need to prepare the instrument:

• Direct and cross screwdriver
• pliers (nippers)
• pliers
• screwdriver - light phase, or tester multimeter

also need the device to connect wirelessly.These may be pads, where the wires are clamped by screw connecting PPE insulating clamps or spring clips Wago.Wiring lamps depends on the amount and type of light source switch.So, we have a ceiling hole with three wires coming out, a ceiling hook for hanging chandeliers and lighting, which can have a different number of lamps.

chandelier How to connect to the switch

The first step is to deal with the overhead wiring.In contrast to the European standard, where the color and the appointment of wire tightly regulated, our masters often use the control line, which is available, so make sure you define the purpose of each wire.Of the three wires, one necessarily zero, and the other two wires fed through the phase of the switch.

sequence works:

• Turning off the machine power and dvuhklavishny switch
• Divorce parties three segments ceiling wires to avoidcircuit
• Remove insulation from each wire, about 1 cm
• Turn on the power machine and switch
• Touching phase indicator to each of the three wires from the emission of the indicator is two phase wiresand define the zero (on it there is no voltage and the LED is not lit)
• alternately turning off the switch button, fix line presence phase, the keys switch

This wiring diagram chandeliers provides three modes of illumination brightness and suggests connect the chandelier to dvuhklavishnomu switch:

• enabled one group of lamps
• include another group of lamps
• connected to all lamps simultaneously

This is the answer to the question of how to connect dvuhklavishnuyu chandelier.

Different types of connections

next stage of work - is the definition of electrical connections the most chandeliers, but it should be borne in mind that they may not be.Most chandeliers are produced by three-wire circuit, and to understand how to connect a 3-wire chandelier, it is enough to look izdeliya.Tam passport scheme has a group of lamps, for example, if the chandelier has 5 lamps, they are combined into two groups with different numbers of light sources.

Scheme Set common wire which will be connected to the neutral wire coming out of the ceiling, and twothe remaining two wires are connected to the phase conductors extending from the switch.So the question is how to connect the chandelier to the switch is not too complicated.As chandelier connect 3 wires.If the circuit is absent, the common wire always has a different color than the two phase conductors.

How to connect the chandelier from the ceiling when three out of wire, and by chandeliers depart only two, while the lamp may have several lamps.This design means that the power of chandeliers enough of one of the two phase wires, so once the phase wire must be reliably insulated.A professional electrician or a person, a good understanding of electrical engineering, this chandelier can parse and execute the internal connection of lamps, as it in handy.Of course, all the work is best done using a universal tester.

chandelier How to connect, if it has no internal wiring, and all connections must fulfill the user, as it is convenient.For example, we have chandelier lamp 6, and it goes out of the wires 12 are generally of two colors.This means that each lamp separately derived and fixture does not interconnect.Connecting a chandelier is not difficult, besides the chandeliers of this type are designed for use in modern lighting systems involving the use of a special controller that allows you to include any number of lamps, as well as the use of remote control.

If the connection is a chandelier will be done without a controller, the 6 wires of the same color must be connected to each other - this will be zero, and the remaining 6 wires of another color into two groups, for example, equally, that is, three wiresgroup.The result is a classic circuit that connects to dvuhklavishnomu switch as described above.

How to connect two lamps from one dvuhklavishnogo switch

It's easy to do if you have installed a decorative ceilingFor example, in the bathroom and toilet.Then, behind the ceiling can increase leads and control the lighting in the two rooms with a single switch.As all electrical work can be carried out for the stretch ceilings in the living rooms.

How to connect the chandelier with remote control

The most modern version of domestic lighting systems are lighting with controller and remote control.The light sources commonly used LED matrix.

controller allows you to include a large number of light sources, in any configuration, and additional programs allow you to use such a system, as a design element that performs the function tsvetomuzykalny installation.In order to understand how to connect the chandelier with remote control, you need to carefully read the instructions.

This system consists of a base unit and a remote control.The controller is usually placed in a decorative case, the ceiling chandeliers.On the terminal «L», the controller is connected phase, and on the terminal «N» - zero.Group lamp lights combined by one party (the wires) and is connected to zero, and loose wires are connected to the corresponding outputs of the controller.The instructions detailed lighting system programming using the remote control.