Instructions for the construction of the fence with his hands

Every owner who purchased the land for the construction of a country house, dreams enclose all reliable fence.In modern conditions it is, ─ not just a portion of the attribute, which protects private area from prying eyes, but also an indispensable attribute that emphasizes the aesthetic nuances of the landscape.

various materials used in the process of its construction.Of particular note is the fence, built of corrugated board.This material is extremely popular, with a huge amount of positive qualities and characteristics.With certain skills and adhering to certain rules, it is possible to install a fence made of profiled floor with his hands.

About a metal fence of corrugated

equipment area metal fence of corrugated board is the most common and affordable way to plot the fence.It is erected, like the fence will reliably protect any piece of land, perfectly correlated with any design solution.This was made possible thanks to the fact that the specialized web in a large range of colors, with a huge line of shapes and sizes.

Mounting such fences takes place in tandem with metal poles.Ready-made design impresses many positive qualities:

• - easy to install;
• - strength;
• - high degree of protection;
• - durability;
• - unpretentiousness in service;
• - a solid level of sound insulation;
• - modern, stylish look;
• - a relatively inexpensive cost.

materials of which are built fences of profile.

To erect fences profiled sheets need to stock up on some building materials.to build a normal fence will not be possible without them.We are talking about:

1. Decking ─ universal material.His installation is rather simple.Because of this, the costs of construction, is relatively small.In addition, the fence is a relatively low price, and the profiled draws strength, reliability, and comfort;
2. supports, which are mainly used by a number of special metal pipes, round or square.In some cases it may be brick columns.
3. joists ─ the cross-member made of metal, which is used for secure fastening of supports and protecting surfaces, making sections of the fence very strong.
4. ─ fastening dowels that can securely fasten the entire structure together.

As the area is marked by

perimeter Before you start building work, it is necessary to partition the territory, and to collect the necessary number of data about the perimeter area.It should be clearly calculate the number of columns that will be needed in the construction of the fence.Then, a marking on the ground.

beginning at the corners put hammered pegs.Between them stretches the thread along which made the desired mark.At the same time, using construction tape.On the basis of the data comes from the development of the future of the fence profile webs.

The construction of various types of fences:

By definition of the profiled sections of fences are of two types:

1. fences, where the poles are the metal tubes.
2. enclosures in which the support posts are laid out with bricks.

Such fences are performed in the following varieties:

- design, in which corrugated roofing sheets are placed over the entire height (from the ground to the upper edge);

- facilities where webs of the profile rest on a concrete foundation or brick ledge connecting the support posts.

first version is considered more economical, since there is less necessary materials for the construction, which means the construction itself will take place more easily.The second option looks more beautiful and respectable (but, at the same time require greater labor costs).

Walkthroughs

Fences, where support pillars are the segments of metal pipes, arranged in the following sequence:

Step 1, the installation corner posts in those places, which indicated surveyors.For instillation of the next column dug desired depth fossa (to fence well resisted the gusts of wind, it is advisable to immerse the pole into the ground by one-third the length).Big reliability and robustness is achieved by pouring concrete deepening solution.

Step 2. Mounted formwork for creating a side that connects the adjacent columns.size (width) of the latter depends entirely on the willingness of the owner (aesthetically beautiful design look in the 15-20 cm).

Step 3. The distance along the length of the fence is divided into 2.5-3-meter intervals.In the corner points stretched thread.

Step 4. According to the markup-Ground poles.The best visual effect is achieved when the supporting pillars are arranged at equal distances.For more comfort, the second line is drawn at the bottom, so that it becomes easier to build columns in a single plane.

Step 5. In the finished container formwork is poured concrete.In this case, it is advisable further to test the accuracy of the vertical, longitudinal and transverse posts located.After that the construction should be left to dry completely.

Step 6. Ready poles hung a set of horizontal cross-bars, which can weld.

Step 7. There fasteners vertical sheets of corrugated board.For fixing, a set of screws for metal roofing.In the building materials market offers a broad range of such fasteners, a wide range of shapes and colors.

process of erection of the fence, in which there are columns of brick ─ deal more expensive and laborious.As a result, created a fence, endearing its beauty and practicality.It correlates well with any design of private homes in which there is a brick.Finished construction of this type is incredibly elegant.

Such designs are as follows:

Step 1. Determine the location of the fence and going formwork for the foundation.Last created binding reinforcement (using metal fittings. This is necessary, because a priori brick has a large mass, which means brick pillars (along with jumpers) will be quite heavy, and the foundation can not withstand the load. Armature positioned vertically and obkladyvaetsyabrick.

Step 2. There is a putting some pillars and intermediate jumpers. If the standard height of a fence at around 20-30 cm and 150-160 cm from ground level laid brackets, which in the future will be mounted horizontal bars. from time to time, withthe spirit level, plumb verified.

Step 3. Embedded welded set of horizontal bars. It is advisable here to cover the whole set of paint horizontal metal components, so they are not influenced by precipitation, and did not develop corrosion.

Step 4. Profnastilnye sheetsmounted on a horizontal bar. used for roofing screws or riveting, which are fixed riveting.

Step 5. To brickwork pillars could resist precipitation, hoisting the top cover.

Service fence of corrugated

order to serve like a fence for a long time, it is desirable to be regularly cleaned of dirt.You can use any soap.At the same time, it should be remembered that in their composition should be solvents since they can damage the corrugated sheet.

Video - how to make the fence of corrugated board with his hands