Aspen and other species - why we choose natural wood ?

Natural paneling in the rooms - when we use it?

In most cases, lime linings, as well as many other kinds of material used in the need for finishing work in baths, saunas, or private balconies and loggias.But it is also worth noting that some of the design ideas in the interiors of houses and apartments is impossible to imagine without the presence of wood on the walls of the room.In this case too the applied finishing material of natural origin.

should pay particular attention to the fact that the proposed lining samples on the market are not the same.They differ in quality and, consequently, costs.This is due to certification requirements to the wood.To assign one of four categories of quality is taken into account several factors, which we describe below.

How to assess the value of the lining of the tree?

primarily considered a breed of wood, because of the value and versatility of use, and its rarity increases the cost.For example, alder lining is less expensive than oak paneling.Molded Cedar will cost several times more than most varieties, as the value of the wood is high enough.

division is also in the class of timber.Deciduous lining has cost an order of magnitude lower, but there are exceptions, so the oak paneling is very much appreciated and is accordingly not a little.This is not surprising.After the needles range of application is much wider than that of its opponent.This material can decorate all the rooms that do not have a high moisture content, coupled with an increase in air temperature.

Currently, the building materials market, there are many vagonok for finishing buildings.But only wood specimens can rightly be considered an environmentally friendly material.In addition to the surface mounting technology eliminates the rough finishing process freshly renovated walls, which in itself saves a lot of time and effort during the tiling.A possible use battens on all surfaces depending on stylistic solutions.

Features of lining for decoration

Molded aspen most often located in the steam room and sauna, and all because she has a nice light shade, relaxing effect, and it is characterized by a reduced resinous, or rather its absence,and low thermal conductivity.But there she is one unpleasant feature, which is at odds with its field of application, it is blue on contact with moisture.But without a good protection and impregnation of wood that is not used, therefore such trouble with her does not happen.

To date, very popular and has a wide use of Angara pine paneling.With direct relation to the coniferous trees, this wood has not only a luxurious appearance, but also is able to disinfect the indoor air than deserves the right to be as a floor covering children's rooms and bedrooms premises.Endowed with the same properties and lining needles, the raw material for which has a similar beneficial effect on the surrounding air.

Keep in mind this feature when choosing between deciduous and coniferous species.But, as mentioned earlier, it has a number of limitations.If you need to produce a finish sauna, you should get on deciduous trees, used in the manufacture of lining.The best, but not the cheapest option, is oak wall paneling.This material has a beautiful structure with a minimum knot.

In addition, the breed strength exceeds all expectations.This material is subject to competent installation and handling will be quite an impressive amount of time, the range of its application is not limited to the twin.

This universal wall paneling, allowing itself to be used in the finishing of the interior, as well as the facades of the building, as it provides excellent resistance to both extreme cold and exhausting the high temperature of the air in the summer.When the field of view of designers and builders gets birch paneling, try not to abuse its use in the interior.

experts in one voice say moodiness material and advised unless absolutely necessary, to avoid kazusnye moments, not to apply it in practice.Summarizing all the above, one would like to mention the fact that, despite the value of the timber, it is necessary to take into account all the nuances and, as a result, choose linings suitable for the intended space for all features.