Molded board - installation and proper preparation

Molded board with his hands - the main material whims

Using linings for finishing work has both advantages and disadvantages.Benefits include, first of all, that the wood is an environmentally friendly material that creates a favorable atmosphere in the room.Processed using modern technology, it becomes water-resistant and durable, which prolongs its service life.

She has a lot of color variants and an attractive appearance, which will create comfort in the room.Wooden wall paneling, whose dimensions are standardized, has another inherent advantage - the ease of installation, because it does not require training or leveling walls.

The main disadvantage of wooden lining - it is highly flammable, so before installing it is necessary to process a special fire-fighting composition.It also does not tolerate changes in temperature and the biological effects of bacteria and fungi.

Create the necessary support structures for mounting

Before you begin, you need to dry lining and acclimatized.Before covering the wooden battens special antiseptic, sort it, because the party often come defective rail.If required, immediately necessary to lay all utilities (electricity, telephone) and make sure they are working.

mounted wooden paneling with their hands quite easily.First of all, you need to decide on the type of installation: horizontally, vertically or diagonally.If the surface you plan to sheathe, and has a flat wooden base battens can be attached directly to it.But most of the support frame should be collected first.

for upholstery wooden paneling of the walls made of concrete or bricks will need such a tool: hammer, builder's level or plumb, power drill, hacksaw, hammer, staple gun with staples.

for crates need wooden blocks, which are mounted over the entire area is sheathed surface in increments of 50 to 90 cm If the surface is smooth, the bars can be nailed dowels or glued to the wall, but if not -. Worth using adjustable hangers or wooden wedges for the lining.

necessary that all elements of the frame are in the same plane and are at one level.framework bars should be perpendicular to the rails lining during installation.

Molded board - installation with their own hands

After mounting battens to do insulation, if necessary.Further, should begin to work with the basic lining.In the horizontal direction rails location installation can be made both from the ceiling to the floor, and vice versa, with vertical - installation is carried out from the corner.The first panel is fixed more carefully.

There are several ways to mount the panels.Fixing it can be done with galvanized nails that are hammered by the board center, close to the groove.With dobojnika nastavki utaplivajut or nail head.Fixing boards sometimes do and screws.To this end, the panel need to drill a hole the diameter of the screw cap, and after screwing dowel inserted.Also, the board can be fixed using a stapler.Staples are driven into the stud at an angle.

Consistently board over the board, sheathed the entire surface.To hide the edge on internal and external corners, they can paste special decorative corners.Before you paint the wooden battens, it must be cleaned of chips and wood dust.When painting or varnishing panels should avoid the appearance of sagging.