How to mount the plinth to the floor or the finishing touch with his own hands

Wooden plinth - an old-timer in the interior

plinth - is not only a special strap covering the compound walls and the floor, but also a very important element of the decor.Gone are the days when there was only one kind of such a desired finishing material.Today, as they say, would be money and skirting can choose whatever: a traditional - wooden, high-tech and new - from MDF or plastic.

slats in solid wood have been, perhaps, the only available before the beginning of the 90s.They had all known triangular form and no different special delights.Modern wooden plinth become much more graceful, now it is a straight profile, which has a rounded top, and sizes vary within 10-12 cm.

sorts tinting give even the most common type of wood valuable species.An important condition for securing such a plinth is required and cover with oil or varnish before performing the installation.the installation process itself is discussed below.

How to mount the plinth to the floor?For fastening of wood using two methods:

• fixation screws, made when fixing a plinth size of 8-15 cm holes left after fixing screws, close special wax pencil, combined with wooden planks color;.
• fixing galvanized finishing nails.

Plinth MDF and veneer - especially fixing

Veneer baseboard - it trims made from pine or spruce wood, which is glued natural wood veneer of valuable species.This technology allows you to be a huge variety of all kinds of profiles.How to strengthen the floor plinth of this kind?For its fixation used:

• mounting clip that are supplied with the material.This mount allows not damage the surface, a special slot at the base designed for this purpose, allowing the finish to wear them and still capture.
• special glue "liquid nails".

Plinth MDF , thanks to a dense and smooth base, have a fairly stable structure.This type must be installed in rooms where needed smooth and straight elements along the contour of the room, with a monochromatic finish and strict forms.How do I attach the baseboard to the floor?These strips are fixed on technology similar to the wooden mounting options.

PVC - mask all the shortcomings

Plinth PVC differ huge variety of shapes, colors and textures.If necessary, this finish is very easy to remove and change.The main advantage of this material is flexible, thanks to which the strap is easy to repeat all the irregularities of the surface, thereby concealing them.

apply the finishing material is recommended with linoleum and laminate flooring.Also in this class there is a special kind of skirting - PVC slats with cable channel.Their installation is particularly useful when you want to hide in-house communication.How to attach a floor plinth made of plastic?Such PVC slats are attached in two ways:

• screws and dowels;
• using locks that allow the laying of cables in the technological gap between the skirting and the wall.

General rules for fixing skirting boards

To implement fixing skirting boards , you will need:

• himself the object of discussion;
• liquid nails or screws;
• hacksaw;
• screwdriver.

Before assembling wooden plinth (plastic strips, this condition is not critical), you need to align the walls.

Start fastening the plinth to the floor with the corner members.To this end, the edge strips are cut at an angle of 45˚ and dock in the corner.If there are minor discrepancies, they being undermined coarse sandpaper.But it's important for wooden baseboards.In plastic counterparts, there are special corner elements, which allow to dock planks without much hassle.

After fixing all corner joints remaining trimmed baseboards and adjust themselves between them.If a freeze occurs on the screws, then twist them should be closer to the joints of the compounds, for good connection joints.Caps screws subsequently masked special wax pencil.

If the installation is carried out on the clip, the place of attachment is calculated from the pitch of 30-40 cm. In this case, if there is a place of fastening clips surface roughness and lack snug strap should be slightly shifted and reduce the distance between the bindings.