How to clean the iron is not expensive quickly and efficiently ?

Household chemicals

To avoid unpleasant consequences of delayed treatment, the procedure should be carried out regularly and not shelved.How to do it: grandfather crumpled newspaper or modern means - the choice for every woman.All possible to date methods described below.

there on the Russian market some tools that "know" how to clean an iron cope with scale and other contaminants.For example, an indelible pencil, which when heated softens deposits, and it can be easily removed with a soft cloth.But produced by a chemical reaction is extremely harmful to human health, so do not abuse this facility.In addition, a very pungent smell can trigger an allergy.After the application is not necessary to clean with a wet cloth sole unit.

gidroperit

Cardinal cleaner, work which is accompanied by the release of large amounts of gases that are harmful to health.Clean the better outdoors, away from food and children, and then wash thoroughly with cold water and a sponge.For use enough 1-2 tablets.

Folk remedies

1. vinegar.To do this you will need vinegar.They infiltrate the rough cloth and wipe the iron warmed up.Note that it evaporates quickly and for its efficiency, add a few drops of ammonia.It is best to work with these agents on the street or in a well-ventilated area.If there is no vinegar, ammonia will be enough.In case of a negative result of the first, repeat the procedure again.
2. Sol.Finely grind the salt will be the main fighter with Prigara.But it is worth remembering that it is applicable not for Teflon coating.When cleaning is necessary to sprinkle salt on paper or cloth, and then the heated iron to press a power to the layer of salt, so how would you stubbornly rebellious ironed fabric.Do not do it on paper, because the printing ink can be observed on the surface of the device.You can also be added to the crushed little wax salts, thus avoiding scratches in various soles.
3. toothpaste and a rag.It used with detergent composition and requires abundant friction.Then wash off with a clean woolen cloth.
4. Citric acid.Medium was dissolved in warm water, and then heated iron rubbed with the solution using cotton tampons or.If a difficult hole, using cotton swabs.
5. Soap.Old and proven method of housewives.After ironing rub the sole of soap, and when it cools down - wash cloth.

Special means

How to clean the iron from fouling by means of special tools?That may be a metal scraper.To do this, turn off the hot iron and soshkryabat blurred pieces scraper or spatula.Everyone knows how unpleasant to spoil things, especially white, imprint burnt the soles, so again, heat the iron and rub with coarse cloth to secure the result.

medical facility also has a cleaning effect on the surface of iron, so soaking a piece of cotton wool peroxide and rubbing the sole, can be significantly scrub soot.A positive quality of this method is the lack of odor.But if no peroxide, acetone can be applied, and means for removing the varnish.It is only important to monitor, that the funds are not impacted with a plastic component of the device.

Cold cleaning with baking soda and water.Cotton and soda solution also "know" how to clean utyug.Nemnogo soda moistened with water, add detergent, and the resulting slurry was applied to the soleplate.It will soften the fumes and after it can be easily removed with a cloth together with coke.And the solution and rub the cloth must be very intense, so that the surface has departed.And you can wet a rough cotton fabric with a solution of soda, decompose it, and hard to press the heated iron to the fabric.Part of burning quickly left on the fabric - 100%.

Good luck!Keep soybean appliances!